Free "Flap Discs" for Your 4 1/2 Inch Angle Grinder
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 47
Like Tree136Likes

Thread: Free "Flap Discs" for Your 4 1/2 Inch Angle Grinder

  1. Top | #1

    Join Date
    Jul 2015
    Last Online
    Yesterday @ 10:29 PM
    Location
    Near Roa. VA
    Posts
    3,672
    Thanks
    43
    Thanked 455 Times in 347 Posts

    Free "Flap Discs" for Your 4 1/2 Inch Angle Grinder

    Flap discs are pretty much so expensive that I stick to grinding wheels,,
    the flap discs sure do a nice job of prepping for paint,,, though,,,
    I found this offer, and ordered my 10 free flap discs,,

    https://benchmarkabrasives.com/colle...d-grit-10-pack

    Be sure to enter "FREEMIX" at checkout,, the $23 price goes to $0,,,

    There is a $10 shipping charge,, that is reasonable to me,,,
    mjncad, Gizmo2, DRobinson and 11 others like this.
    Some of the tractors include JD 4105, JD 855, JD 650,,,, and,,, the IH 584 4WD
    My favorite attachment is the homemade landplane,,, EVERYONE needs one of those!!

  2. The Following 22 Users Say Thank You to CADplans For This Useful Post:

    balrog006 (12-17-2018), Big (12-23-2018), BigJim55 (12-20-2018), bmichael (12-28-2018), Bubber (12-20-2018), Drifterbike (12-17-2018), Gizmo2 (12-27-2018), GKofTX (12-23-2018), HVACguy (12-23-2018), ilmo (12-20-2018), jdforever (12-19-2018), jgayman (12-17-2018), johnH123 (12-17-2018), lost in wisconsin (12-20-2018), mjncad (12-18-2018), OxPath (12-17-2018), Plug Ugly (12-23-2018), Robnik (12-17-2018), rokwol (12-22-2018), rwmeyer (12-17-2018), trboxman (12-26-2018), wardlake (01-10-2019)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    IndianaJim's Avatar
    Join Date
    Feb 2013
    Last Online
    Yesterday @ 11:08 PM
    Location
    Indiana
    Posts
    1,474
    Thanks
    24
    Thanked 200 Times in 153 Posts
    Try these guys next time, when you cant get them for free.
    Lehigh Valley Abrasives | Flap Discs, Surface Conditioning Discs, Abrasive Sanding Discs, PSA Disc Rolls, Surface Conditioning Belts and Metalworking Abrasive Sanding Belts

    I bought from them last time, and am happy with them. Ive used a few other brands before, and these seem to be pretty good.
    mjncad, Tomfive, Levi and 2 others like this.
    Jim B.

    318, 49 Thrower, 2 80 Carts, 17AT cart, 54 Blade, 12" Brinly Plow, 30 Hydraulic Tiller w/extension & Briney 3-Pt hitch, 50 deck w/JRCO Cart Bagger.
    2025R, 120R loader w/Kens Bolt On Hooks, 260B backhoe w/8" & 16" buckets, Titan 36" forks, Imatch hitch, Weight Bracket/Hitch.

    Exmark Lazer Z HP 52"
    Husqvarna 550XP, 562XP, 55 Rancher

  5. The Following User Says Thank You to IndianaJim For This Useful Post:

    mjncad (12-18-2018)

  6. Top | #3
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 01:04 AM
    Location
    Central Pennsylvania
    Posts
    10,312
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    Thanks! A buck a piece. That's a decent deal. A 10-pack of flap discs at Harbor Freight is $10.
    Levi, BigJim55 and CADplans like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4

    Join Date
    Jul 2015
    Last Online
    Yesterday @ 10:29 PM
    Location
    Near Roa. VA
    Posts
    3,672
    Thanks
    43
    Thanked 455 Times in 347 Posts
    Quote Originally Posted by jgayman View Post
    Thanks! A buck a piece. That's a decent deal. A 10-pack of flap discs at Harbor Freight is $10.
    The only zirconia discs that I see at HF are $7 each,, the 10 pack is aluminum oxide grinding discs, cut off discs, and a couple flap discs,,
    BigJim55 and Robnik like this.
    Some of the tractors include JD 4105, JD 855, JD 650,,,, and,,, the IH 584 4WD
    My favorite attachment is the homemade landplane,,, EVERYONE needs one of those!!

  9. Top | #5
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 01:04 AM
    Location
    Central Pennsylvania
    Posts
    10,312
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    Quote Originally Posted by CADplans View Post
    The only zirconia discs that I see at HF are $7 each,, the 10 pack is aluminum oxide grinding discs, cut off discs, and a couple flap discs,,
    I had just did a quick check on their 10-pack... I saw it was an assortment. I figured if this deal was better than HF then it was a no brainer. :-)
    CADplans likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  10. Top | #6

    Join Date
    Dec 2012
    Last Online
    Yesterday @ 04:29 PM
    Location
    Belton, South Carolina
    Posts
    1,658
    Thanks
    503
    Thanked 134 Times in 104 Posts
    So far, I have never found any of the HF abrasives to be worth a darn. Also, I got their stupid 5 inch random orbit sander to do a cheap & dirty job on some PT lumber. The stupid hook & loop mounting pad on the sander actually went BALD. It was so funny I could not control my Now I see that Ryobi sells a replacement hook & loop pad for their sander & other brands. I guess Ryobi gets their sanders from the same Chinese junk factory as harbor freight but they are boosting their sales with repair parts available at the H. depot store.

    I wonder if China uses the same tools they sell us to build all those war ships & islands in the south china sea. If they do, I don't think we have anything to worry about.
    Levi, BigJim55, mark02tj and 5 others like this.

  11. Top | #7
    johnH123's Avatar
    Join Date
    Feb 2015
    Last Online
    11-14-2019 @ 06:57 PM
    Location
    Indiana
    Posts
    4,405
    Thanks
    464
    Thanked 329 Times in 277 Posts
    Quote Originally Posted by Maddog View Post

    I wonder if China uses the same tools they sell us to build all those war ships & islands in the south china sea. If they do, I don't think we have anything to worry about.
    Maddog, Levi and CADplans like this.
    - 2002 John Deere 4510 TLB PR,
    -Woods BB60X 60" rotary cutter
    -Countyline box blade,
    -Allis Chalmers sickle mower,
    -RED windrow rake,
    -titan 48" 3000 pound forks/bale spear
    - Farm Star rear bale spear

    Yamaha Rhino 700, Yamaha Rhino 660,
    Murray 624 mower/38" deck

  12. Top | #8
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 01:04 AM
    Location
    Central Pennsylvania
    Posts
    10,312
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    I received an email from the company saying my flap discs have shipped already. So right off the bat they get 5-points for prompt service and good communication.
    Zebrafive, Levi, BigJim55 and 2 others like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  13. Top | #9

    Join Date
    Sep 2014
    Last Online
    Yesterday @ 07:35 PM
    Location
    West Michigan
    Posts
    1,956
    Thanks
    95
    Thanked 222 Times in 177 Posts
    I’m in for a set, for $10 even if they don’t last there are 10 of them-thanks!

    FYI-I used PayPal to checkout, it wouldn’t load from the cart page in Safari so I moved to Chrome and things went smoothly.
    BigJim55 and CADplans like this.
    2004-L130

    2013-2032r, Curtis Hard side cab (project), H130 FEL & 61"bucket, Artillian Modular Grapple on HD frame with Diverter, 2300# Artillian frame w/ 36" x 3" tines, 46BH 9" & 13" bucket, Frontier RB1060, HLA 1000 series 60" JDQA Snow plow, JD ballast box, RK QH, Homemade 3pt multi purpose hitch, 117W of extra LED lights on ROPS and side Brush guards, Ken's bolt on hooks-3x, Ideal Knife grooved R-4's.

  14. Top | #10

    Join Date
    Sep 2014
    Last Online
    Yesterday @ 07:35 PM
    Location
    West Michigan
    Posts
    1,956
    Thanks
    95
    Thanked 222 Times in 177 Posts
    Shipping notice received today, USPS mail-should arrive by the weekend.
    CADplans likes this.
    2004-L130

    2013-2032r, Curtis Hard side cab (project), H130 FEL & 61"bucket, Artillian Modular Grapple on HD frame with Diverter, 2300# Artillian frame w/ 36" x 3" tines, 46BH 9" & 13" bucket, Frontier RB1060, HLA 1000 series 60" JDQA Snow plow, JD ballast box, RK QH, Homemade 3pt multi purpose hitch, 117W of extra LED lights on ROPS and side Brush guards, Ken's bolt on hooks-3x, Ideal Knife grooved R-4's.

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 5 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •