tubing cutter question?
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree34Likes

Thread: tubing cutter question?

  1. Top | #1
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 02:30 PM
    Location
    Schellsburg, PA
    Posts
    11,235
    Thanks
    3,035
    Thanked 1,401 Times in 1,101 Posts

    tubing cutter question?

    today for the afternoon i had the pleasure of rooting for my tubing cutter. i forget the name of it--found a small size of it i think-but their was no name of who made it on the ad.

    it really saddens me to have lost it or misplaced it, as my late uncle gave me it-yrs ago-he also gave me a furrow tool at the same time-its missing too. my boys might have it-but it would be the same thing as my dad's couple -c-clamps that the oldest one claimed yrs ago i just wished i knew for sure-i am hoping with uns help i can replace them.

    this tool was pretty good size-it had a triangle on it that u could slide out of the way-it was used to clean the inside of the copper pipe u just cut off.

    looked on Rigid but if it was a rigid tool, it must be too old to show up

    thanks
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Sep 2018
    Last Online
    Today @ 01:22 PM
    Location
    Pennsylvania
    Posts
    78
    Thanks
    13
    Thanked 7 Times in 7 Posts
    Blue point?
    Attached Thumbnails Attached Thumbnails TC28C.jpg  
    OxPath, BigJim55 and Old Cajun like this.

  4. Top | #3
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 02:30 PM
    Location
    Schellsburg, PA
    Posts
    11,235
    Thanks
    3,035
    Thanked 1,401 Times in 1,101 Posts
    Quote Originally Posted by Melikes View Post
    Blue point?
    i seen that one advertised tonight. it i think is way too new for the one i used to have-but thanks. really trying to replace what i had-and i have no idea what the name of it was all them yrs

    bad bad
    OxPath and Old Cajun like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Sep 2018
    Last Online
    Today @ 01:22 PM
    Location
    Pennsylvania
    Posts
    78
    Thanks
    13
    Thanked 7 Times in 7 Posts
    The 1 i had and lost i bought maybe 30 years ago. Sure they made them before I got my greasy pecker tongs on them
    mjncad, OxPath, BigJim55 and 2 others like this.

  7. Top | #5
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 02:30 PM
    Location
    Schellsburg, PA
    Posts
    11,235
    Thanks
    3,035
    Thanked 1,401 Times in 1,101 Posts
    Quote Originally Posted by Melikes View Post
    The 1 i had and lost i bought maybe 30 years ago. Sure they made them before I got my greasy pecker tongs on them
    i googled tubing cutter old style--this what showed up-- this what i had kinda--well the triangle point might of been thereso this what i'm looking for now--mine was pretty big--thinking about the size of my hand-i have 2X gloves for my hand-so whatever that size is
    Gizmo2, OxPath and Old Cajun like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  8. Top | #6
    Randog's Avatar
    Join Date
    Mar 2016
    Last Online
    Today @ 08:22 AM
    Location
    SE Wisconsin
    Posts
    172
    Thanks
    22
    Thanked 22 Times in 20 Posts
    I think that may be a #10 Ridgid brand cutter. 1/8" - 1" with fold out deburring tool. (triangle)

    Still available but doesn't look as heavy duty as my 35 year old one.
    Attached Thumbnails Attached Thumbnails 20190917_020618 (2).jpg  
    Gizmo2, OxPath, BigJim55 and 1 others like this.
    2016 1025R FILB: Loaded R4's - 72# Starters - 60" MMM - Mechanical lift - 260 BH - H120 - 53" bucket - Ballast box - 647 Tiller - JD 40 gal 3 pt sprayer
    2003 X595: R3's - 62C MMM - 3 pt hitch - 47" blower - 80 cart - Brinly 24x36 roller - Parker lawn sweeper - 10 suitcase weights
    1994 445: Sold
    2004 X485 AWS:
    Sold

  9. Top | #7
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 04:43 PM
    Location
    New York
    Posts
    34,452
    Thanks
    5,851
    Thanked 3,991 Times in 2,948 Posts
    OxPath, BigJim55 and Old Cajun like this.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  10. Top | #8
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 02:30 PM
    Location
    Schellsburg, PA
    Posts
    11,235
    Thanks
    3,035
    Thanked 1,401 Times in 1,101 Posts
    Quote Originally Posted by Randog View Post
    I think that may be a #10 Ridgid brand cutter. 1/8" - 1" with fold out deburring tool. (triangle)

    Still available but doesn't look as heavy duty as my 35 year old one.
    ur pic is what i had too--guessing it was a ridgid branddon't know or remember--i just knew where it hung at our old house. and ur right it was heavy duty-IMO--that;s why i'm upset it's not where i thought it was--i just hope my boy's has it-along with the tubing furrower too. i wouldn't make them give it back so much-as just knowing their ok in one of their possession

    their's a few old HDWE stores still left around--maybe-just maybe they have one hanging covered in dust ---just waiting for me to come along now

    thanks a million for the pic. i know whats i got to do now
    Gizmo2, OxPath, Old Cajun and 1 others like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  11. Top | #9
    Old Pa-pa Old Cajun's Avatar
    Join Date
    Sep 2014
    Last Online
    Today @ 01:42 PM
    Location
    South Louisiana
    Posts
    10,977
    Thanks
    783
    Thanked 1,340 Times in 990 Posts
    Yup, that's the one I got plus the little *sawed off* one for tight spots.
    Gizmo2, OxPath and BigJim55 like this.
    Neil

    2019 4066R with cab (aka Cooterpiller), 2014 997 Z Trak
    Other equip: 1982 IH 274 diesel, 1957 Farmall Cub, Woods Billy Goat 5 foot rotary cutter, Ford three point hitch 6 foot dozer blade,
    home brew dirt and gravel grader, dirt scoop, choppers, Woods six foot belly mount sickle bar, home brew 3PH 25 gallon sprayer, 1992 33 inch cut Snapper
    rear engine rider, 1984 30 inch cut Snapper rear engine rider.

  12. Top | #10
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 04:43 PM
    Location
    New York
    Posts
    34,452
    Thanks
    5,851
    Thanked 3,991 Times in 2,948 Posts
    Quote Originally Posted by Old Cajun View Post
    Yup, that's the one I got plus the little *sawed off* one for tight spots.
    Here too.
    For those real tight spots like the last two leaks I fixed at my mother's ...

    Click image for larger version. 

Name:	IMG_2524_1.jpg 
Views:	5 
Size:	72.2 KB 
ID:	705520
    OxPath, Old Cajun and Melikes like this.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •