John Deere work light wire harness

[Morrison295]

Does anyone know what he name of this type of connector is called? It?s used on all 1-5 series work lights. I would like to make a pig tail for this connector if I can find solderable/crimpable ends.

[feasant]

looks like a bullet connector

[Kennyd]

They are called "bullet" connectors. Here is one post with some info: http://www.greentractortalk.com/foru...ght-plugs.html

[buckteeth445]

Looks like a banana connector to me.

Sent from my Moto G (5) Plus using Tapatalk

[stevepsd]

Those are indeed 'bullet' connectors.

When I added lights to my 4044R, I also wanted to make a 'Y' harness to tie the lights into the existing wiring, but I could not find the nice, rubber sealed variety that came on the tractor. All of the aftermarket ones would not seal correctly, even looking thru all the many drawers of connectors at the dealer came up empty.

However, John Deere does make a ready-made Y harness with the correct connectors. It is part # LVA19138. Not cheap at around $25.

-steve

[JimR]

They are called "bullet" connectors. Here is one post with some info: http://www.greentractortalk.com/foru...ght-plugs.html

Yup. I stole the NAPA part numbers form the pics in the 1st post in that thread and bought a pack to install work lights on my 2032R. They work like a charm!