new 1025r old poly cart need help finding a extension bar to bolt to 1025r
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
Like Tree5Likes

Thread: new 1025r old poly cart need help finding a extension bar to bolt to 1025r

  1. Top | #1
    machtoby's Avatar
    Join Date
    Apr 2018
    Last Online
    10-25-2018 @ 09:10 PM
    Location
    Winlock, WA
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    new 1025r old poly cart need help finding a extension bar to bolt to 1025r

    I don't have all the lingo to state this correctly. I have a 60d mower on my 1025r and so I can't attach my old poly cart to the PTO and use the mower or visa versa. The cart angle moves to weird positions if I move the PTO height. Can someone help me locate a bolt on extension I can attach to the back where the two pre-drilled holes are below the PTO engagement area? I looked at the Heavy Hitch bolt on, then I would need some sort of extension for that receiver?

    I live by: If there is a will, there is a way. I'm blonde, but not dumb.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 10:18 PM
    Location
    Central New York
    Posts
    10,830
    Thanks
    1,824
    Thanked 1,465 Times in 1,199 Posts
    This is what I use, then just buy a Reese drawbar

    https://heavyhitch.com/product/rear-...ries-tractors/
    Kennyd and BigJim55 like this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  4. Top | #3

    Join Date
    Jun 2014
    Last Online
    Yesterday @ 09:12 PM
    Location
    Berlin, MA
    Posts
    4,540
    Thanks
    94
    Thanked 846 Times in 644 Posts
    Quote Originally Posted by machtoby View Post
    I don't have all the lingo to state this correctly. I have a 60d mower on my 1025r and so I can't attach my old poly cart to the PTO and use the mower or visa versa. The cart angle moves to weird positions if I move the PTO height. Can someone help me locate a bolt on extension I can attach to the back where the two pre-drilled holes are below the PTO engagement area? I looked at the Heavy Hitch bolt on, then I would need some sort of extension for that receiver?

    I live by: If there is a will, there is a way. I'm blonde, but not dumb.

    ???? I'm confused here. You're mower height is affected by the 3pt hitch, not the PTO.

    The simple solution is to attach the cart to the swinging drawbar instead of the 3pt hitch. If your tractor didn't come with a swinging drawbar you can pick one up at Tractor Supply (or any similar store) for short $$.
    PJR832 likes this.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 10:18 PM
    Location
    Central New York
    Posts
    10,830
    Thanks
    1,824
    Thanked 1,465 Times in 1,199 Posts
    Quote Originally Posted by JimR View Post
    ???? I'm confused here. You're mower height is affected by the 3pt hitch, not the PTO.

    The simple solution is to attach the cart to the swinging drawbar instead of the 3pt hitch. If your tractor didn't come with a swinging drawbar you can pick one up at Tractor Supply (or any similar store) for short $$.
    Oh, I think I get it now, I was confused as well so I thought it just simple to show what I have on mine.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  7. Top | #5
    Tomfive's Avatar
    Join Date
    Dec 2011
    Last Online
    Today @ 04:17 AM
    Location
    Mid-Hudson Valley, NY
    Posts
    4,116
    Thanks
    97
    Thanked 603 Times in 469 Posts
    I think the OP does NOT want to attach her cart to the 3PT with a draw bar. I think she has a mechanical lift and when she raises of lowers the mower, the 3PT follows up and down. Adding a 3PT draw bar won't solve her problem (if it's the problem I think), when she refers to the angle changes (Up/Down).

    My opinion for best bet is the hitch plate mounted to the frame under the PTO like the Heavy Hitch. The square receiver should be the standard 2" X 2" that fits all the trailer hitch accessories available in many places like auto supply, Tractor supply, etc, just have to match the end to what is needed (ball, clevis).

    Just my 2 cents. Pics would help.

    Edit, OK, now I understand what a swinging draw bar is, and that would work too, but you may need brackets, or maybe just bolt directly to the frame under the PTO shaft.
    Last edited by Tomfive; 04-11-2018 at 11:37 AM.
    PJR832 likes this.
    Tom

    2011 1026R/R4's -- H120 FEL/49" -- 260 BH/12" -- Bro-Tek Ripper -- Artillian Forks/42" -- 244 lbs JD Rear Wheel Weights -- KBOH Hooks and Clevis' --
    Block heater -- 180* T-stat -- Evans HP Waterless Coolant

  8. Top | #6
    Ransx77's Avatar
    Join Date
    Feb 2013
    Last Online
    08-14-2019 @ 07:08 AM
    Location
    Northampton County, Pa.
    Posts
    614
    Thanks
    90
    Thanked 100 Times in 55 Posts

    I have a Heavy Hitch Receiver Plate for a 1026r

    I kept it when I traded my 1026r in on a 2032r. Let me know if interested. I'm pretty sure I posted it for sale here last fall.
    Yeah I did, here is the link:
    http://www.greentractortalk.com/foru...s-tractor.html
    Last edited by Ransx77; 04-11-2018 at 06:13 PM.
    Randy
    New: 2017 JD 2032R. R3 turf, 220R FEL with Single Point, 7-iron 60D MMM, Artillian Diverter; 2019 Z740r
    Previous: 2012 JD 1026R, R3 turf, H-120 FEL, 7-iron 60D MMM
    Attached: EA Wicked 55 Grapple, iMatch, Heavyhitch w/8x42lb, JD BB5060L, JD LR5060L, JLF-2242 forks, Shaver 101 PHD, Countyline 48" rotary cutter
    Tow Behind: Trac-Vac 880, JD10 Cart, Countyline 25 ton splitter
    Stihl: MS180CB-E; MS391; HT101; FS110; HS81T; BR600 Magnum
    Critters: Bees, Chickens, Maremmas

  9. Top | #7
    machtoby's Avatar
    Join Date
    Apr 2018
    Last Online
    10-25-2018 @ 09:10 PM
    Location
    Winlock, WA
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post
    Yes I put a bar between the 3 pt hitch and my mower does use that source for lifting it up and down. Should I spring for the add on kit that eliminates the 3 pt moving. So the bolt on receiver is the best way to go then put an extension piece on it?
    Thanks all
    Attached Thumbnails Attached Thumbnails BFD2A441-E801-4B6B-859F-8D3043E8E32C_1523500807497.jpg  

  10. Top | #8
    machtoby's Avatar
    Join Date
    Apr 2018
    Last Online
    10-25-2018 @ 09:10 PM
    Location
    Winlock, WA
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post
    So it makes sense I hitched the cart to the place under the PTO, my neck on the cart is too short and hits the 3pt hitch when making corners. I may have someone weld the neck on my cart longer.

  11. Top | #9
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 05:39 AM
    Location
    Central Pennsylvania
    Posts
    9,426
    Thanks
    357
    Thanked 1,538 Times in 1,164 Posts
    Quote Originally Posted by machtoby View Post
    So it makes sense I hitched the cart to the place under the PTO, my neck on the cart is too short and hits the 3pt hitch when making corners. I may have someone weld the neck on my cart longer.

    Your problem is a very common one. I have the same cart and even on my 2-series the drawbar is too short which causes the cart to hit the 3PH arms when turning.

    You could try lengthening the tongue on the cart but I don't think that will help. The cart tongue will still pivot at the same point and hit the 3PH arms. You need to move the attachment point farther back to change the pivot point. There is a more elegant solution that will also make your tractor much more versatile in how you can pull things. I believe some of the previous posters mentioned the same thing.

    Install a Heavy Hitch 2" receiver plate in place of your current drawbar. Then you can use the longer HH 3-way hitch bar which should extend the attachment point back far enough to eliminate the problem. Not only will you be able to pull your cart with the tang but you will also be able to use a pull chain or a trailer ball.

    Click image for larger version. 

Name:	HH_rcvr.jpg 
Views:	36 
Size:	7.7 KB 
ID:	590050

    Click image for larger version. 

Name:	HH_rcvr2.jpg 
Views:	36 
Size:	21.1 KB 
ID:	590066

    Click image for larger version. 

Name:	HH_hitch.jpg 
Views:	36 
Size:	9.2 KB 
ID:	590058
    Last edited by jgayman; 04-11-2018 at 11:01 PM.
    Yank likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  12. Top | #10
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 05:39 AM
    Location
    Central Pennsylvania
    Posts
    9,426
    Thanks
    357
    Thanked 1,538 Times in 1,164 Posts
    Quote Originally Posted by JimR View Post
    The simple solution is to attach the cart to the swinging drawbar instead of the 3pt hitch. If your tractor didn't come with a swinging drawbar you can pick one up at Tractor Supply (or any similar store) for short $$.
    I had a swinging drawbar on my old Ford NAA. I've never seen an actual swinging drawbar for JD SCUT/CUT tractors. All the tractors I have seen have a fixed drawbar. I believe the Tisco swinging drawbars that TSC sells will only fit the older Ford, Ferguson and New Holland tractors.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •