I've Googled around but haven't found anything.
I have a fused 8 AWG wire going into a cab. I'm installing a switch box for accessories (LED light bars and a beacon) where each switch/circuit on the box is individually fused and each has an independent power source wire (4 switches == 8 wires). I'm looking for a clean way to connect the heavy wire to 4 of the 18 AWG wires from the box plus a 5th wire from the wiper motor. Unclean option #1 is to just wrap, solder and insulate the 5 wires to the power feed.
This is what I am going to use for switching.
I would like some kind of compact junction/distribution block to both make the installation neater and allow for expansion.
Is anyone aware of such a thing?