Fuel Tank Lining
Results 1 to 4 of 4
Like Tree2Likes
  • 1 Post By rydplrs
  • 1 Post By MDrew

Thread: Fuel Tank Lining

  1. Top | #1

    Join Date
    Aug 2013
    Last Online
    Yesterday @ 10:08 PM
    Location
    Cartersville (NW) GA
    Posts
    2,391
    Thanks
    103
    Thanked 365 Times in 267 Posts

    Fuel Tank Lining

    Has anyone ever lined a fuel tank? My father has a Case IH 485 diesel that has rust in the tank to the point it is clogging the fuel lines.

    Wondering which product should be used as there are quite a few out there.
    1025r TLB w 60D MMM & Independent Lift
    SN 114287 Built April '13 received 8/21/13
    180 degree thermostat
    Omni Transformer w/ integrated weight bracket
    Single Point
    Ken's Bolt on hooks
    Artillian Forks (42")
    Full Compliment of Wheel Weights (340lbs)
    Custom Seat Springs

    Kubota 326H 72" deck ZTR

    Stihl MS361, FS250R

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2013
    Last Online
    Today @ 05:15 PM
    Location
    Southern Maine
    Posts
    7,846
    Thanks
    624
    Thanked 744 Times in 631 Posts
    Quote Originally Posted by psrumors View Post
    Has anyone ever lined a fuel tank? My father has a Case IH 485 diesel that has rust in the tank to the point it is clogging the fuel lines.

    Wondering which product should be used as there are quite a few out there.
    Yes. I used to get stuff at a boat shop, but used Eastwood last time I did one.
    Gebada22 likes this.

  4. Top | #3
    MDrew's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 07:50 AM
    Location
    S.E. WI
    Posts
    4,070
    Thanks
    290
    Thanked 655 Times in 427 Posts
    Red Kote, easy to use. I've done it several times now.

    Damon Industries Red-Kote Gas Tank Liner
    Gebada22 likes this.
    Mike

    Sometimes I'm only funny to myself.

    300, 140, 318, 430, 314, 110. Brinly plows, disk, 80 cart, couple of 49 blowers, 3 54 blades, 33 tiller, tilt dump MCS, HPX Gator, CS Gator, Model A. Struck MD 750 w/bucket and hoe.
    Drew's Performance: We screwed the last guy so we can pass the savings on to you.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Sep 2015
    Last Online
    Yesterday @ 10:18 PM
    Location
    Burton, Ohio
    Posts
    2,778
    Thanks
    552
    Thanked 443 Times in 351 Posts
    Not sure if you were already savvy to this but folks often add media such as loose nuts and bolts with a little solvent and shake the tank vigorously to brake loose any interior scale prior to coating.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •