Taking delivery this week of a 2018 2025R with front FEL and a Frontier RC2060 rotary cutter. Will be transporting this a few times a summer to mow a few acres at deer camp. Going to transport on a PJ 20 foot utility trailer. Has dual 3500 pound axels both with brakes and is rated for 7000 lbs. Loading ramp/end gate is a steel framed and steel mesh covered rated according to dealer for 5000 lbs. Gate is 79x50 inches, frame is heavy 2 inch square tube. there are 4 2x2&3/4 inch heavy steel angle iron braces in middle of the gate spaced 13 inches apart. What if anything do I need to do to protect the mesh from bending when loading unloading? Hopefully its as simple as being able to keep tires over the angle iron reinforcements. Thanks!