Hydraulic Drain Plug on 6115D
Results 1 to 7 of 7
Like Tree3Likes
  • 1 Post By monroecheeseman
  • 1 Post By Treefarmer
  • 1 Post By monroecheeseman

Thread: Hydraulic Drain Plug on 6115D

  1. Top | #1

    Join Date
    Jun 2018
    Last Online
    10-31-2019 @ 09:40 PM
    Location
    Juda, WI
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Hydraulic Drain Plug on 6115D

    Its time for me to change the hydraulic oil on my 6115D. There are a couple drain plugs on the underside that i need to remove. I have a T55 torx that seems to be about right, but i'd rather not strip it out. Is it a torx, or a some other special bit i need to get? I've searched all the manuals but danged if I can find exactly the wrench or bit i need. THANKS

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 05:58 PM
    Location
    Central Pennsylvania
    Posts
    10,316
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    There are a lot of different years, serial numbers and styles of 6115D. I have no idea which variant you have . I found 4 drain plugs in the parts listing and they were all this one. Looks like 10mm hex.

    I found another version which shows 8mm hex drain plugs.

    Can you tell us which specific configuration of 6115D you have?



    Part Number: YZ90482
    Part Price: 7.43 USD
    On Hand: 0 Check Other Stores
    Description: Drain Plug - DRAIN PLUG


    Attached Thumbnails Attached Thumbnails YZ90482.jpg
    Last edited by jgayman; 06-24-2018 at 01:42 PM.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. Top | #3

    Join Date
    Jun 2018
    Last Online
    10-31-2019 @ 09:40 PM
    Location
    Juda, WI
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Picture of the Plug

    I bought the tractor used, so not sure if this is the stock plug or not. Looking at the ZLP website it shows the size M22 x 1.5 but it specifies it with a the hex size as 10, but the plug sure doesn't look like a hex plug.
    Attached Thumbnails Attached Thumbnails 20180625_194524.jpg 20180625_193556.jpg
    johnH123 likes this.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 05:58 PM
    Location
    Central Pennsylvania
    Posts
    10,316
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    That does not look like the factory plug.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  7. Top | #5

    Join Date
    Mar 2015
    Last Online
    Today @ 10:06 AM
    Location
    Eastern Virginia, United States
    Posts
    4,628
    Thanks
    349
    Thanked 828 Times in 544 Posts

    Make do

    Quote Originally Posted by jgayman View Post
    That does not look like the factory plug.
    It looks like it started out as a hex and someone hammered a torx into it. If you can get it out, I think I'd replace it.

    Treefarmer
    jgayman likes this.
    John Deere 790, 300 loader w Ken's Bolt on Hooks & Piranha tooth bar, grapple, back blade, box blade, Bush Hog mower, couple of red tractors, hay equipment, various old stuff some red, one orange, some I don't remember

  8. Top | #6
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 05:58 PM
    Location
    Central Pennsylvania
    Posts
    10,316
    Thanks
    372
    Thanked 1,703 Times in 1,290 Posts
    Quote Originally Posted by Treefarmer View Post
    It looks like it started out as a hex and someone hammered a torx into it. If you can get it out, I think I'd replace it.

    Treefarmer
    I think you may have nailed it!
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  9. Top | #7

    Join Date
    Jun 2018
    Last Online
    10-31-2019 @ 09:40 PM
    Location
    Juda, WI
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Stock Drain Plug

    I went into JD and got new plugs YZ90482 to replace the ones i had and interestingly they were exactly like the the old ones. They are 10mm or 3/8 hex magnetic zero leak plugs. Guess as long as you use the correct wrench to tighten the plugs you should have no problem. I'm also going to note in the tractor book the correct wrench size.
    Georgia_Johndeere likes this.

  10. The Following User Says Thank You to monroecheeseman For This Useful Post:

    Zebrafive(07-18-2018)

  11. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts