WTB several items for 4100/410
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree2Likes

Thread: WTB several items for 4100/410

  1. Top | #1
    JD-4100's Avatar
    Join Date
    Mar 2016
    Last Online
    @
    Location
    Indian River
    Posts
    443
    Thanks
    70
    Thanked 91 Times in 55 Posts

    WTB several items for 4100/410

    Looking for owner manual for my 4100 and for the 410 loader. Also WTB side decals for the 4100 hood; and a 5' or 6' landscape rake (for local pu in the Pa/Delaware/Md area).

    Not sure I should have it, but I also may be interested in a ROPS bar for the 4100. Mine did not come with one.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Mar 2014
    Last Online
    08-11-2019 @ 08:38 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts
    Check eBay for the manuals. I found both operators manuals and the tech manual for the tractor for not much $. I'd buy the decals from Green Farm Parts and use the gtt discount, I doubt you'll do better on the price and their service is great. For the landscape rake check your local craigslist. One will turn up eventually, this time of year is good as people start cleaning things out after the winter. I've seen ROPS turn up on both eBay and CL but it may take a while and you might have to travel a bit. There are also some tractor scrap yards around that might be worth calling. You'll get different opinions about ROPS but most think you should use it. Things can go south very quickly, why not increase your chances of staying injury free.
    sterling40man and BigJim55 like this.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  4. Top | #3

    Join Date
    Mar 2014
    Last Online
    08-11-2019 @ 08:38 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts
    John Deere 410 and 420 Loaders Operators Manual | eBay

    John Deere 410 SN 8802 420 13055 Loader 855 870 955 4100 4200 4300 4400 Manual | eBay


    John Deere 410 008802 Up 420 013055 Up Loader Operator Manual F1 | eBay


    Here's a few loader manuals. They are serial # specific so you need to find yours. It should be on a sticker near the bottom inside face of the left side mast. I didn't find any tractor operator manuals tonight but keep checking as they turn up regularly.

    And welcome to the forum.
    Last edited by eastcreek; 03-29-2016 at 07:22 PM.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    JD-4100's Avatar
    Join Date
    Mar 2016
    Last Online
    @
    Location
    Indian River
    Posts
    443
    Thanks
    70
    Thanked 91 Times in 55 Posts
    Thanks for the replies, and suggestions. I have been looking on CL and ebay, almost to the point of exhaustion. So far, I haven't turned up anything on the rake. Went to TSC today, and looked at their CountyLine rakes. I'm not too convinced that their method of attaching tines, is very good, or the quality of the steel. I'll keep looking for a while, until I am pushed to make a decision.

    I did find one manual for the 410 loader, but didn't know that they are s/n specific, so I'll need to check more on that.

    And thanks for the welcome, eastcreek.

  7. Top | #5

    Join Date
    Mar 2014
    Last Online
    08-11-2019 @ 08:38 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts
    If you PM me the loader serial # I'll let you know when I find the manuals. I got both user manuals for $10 - $15 delivered and think the tech manual was about $50 shipped. My 4100 was a bit rusty when I got it and I did buy some used parts from a scrap yard in the midwest. There were several ROPS available when I was looking so I'd think there would still be a few around. I check eBay and CL almost daily so I know that some of this stuff turns up on a regular basis.

    The loader serial # break is - 8801, and 8802 -.
    Last edited by eastcreek; 03-30-2016 at 08:49 AM.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  8. The Following User Says Thank You to eastcreek For This Useful Post:

    JD-4100 (03-30-2016)

  9. Top | #6
    JD-4100's Avatar
    Join Date
    Mar 2016
    Last Online
    @
    Location
    Indian River
    Posts
    443
    Thanks
    70
    Thanked 91 Times in 55 Posts
    Thanks eastcreek. I did some more research this AM, and ordered (what I think) to be the correct manual for the 410. The number on tag is partly scraped right near the center, so the dash is where I am not sure whether there should be a number. Tag reads *W00410-***007*

    I do have the 595 page technical shop manual, so I'm good there, and I obtained a free copy of the 4100G manual (gear transmission). Mine is a hydrostatic drive, so I don't have that part of the manual, but everything else is pretty much the same.

    Today I changed the oil & filter, air filter (and checked the secondary air filter.. it was like new). Found and greased 17 grease fittings; removed the battery, wire-brushed, sanded, & primed the battery tray and surrounding metal, and fabricated a new glow-plug timer, to replace the defective OEM timer that JD wants $100 for. (I used a general purpose programmable timer that I had on hand, from my old security equipment inventory And if I didn't have one, they are less than $10 new.

    I have it set to 15 seconds, but it can be adjusted to anything from 1 sec, to 2 minutes. I think 15 sec is about right, but we'll see when the weather gets real cold again. Just need to get a plastic mini-box tomorrow, to mount it in.

    Still have more to do, but I'm anxious to get'er ready, as I have some cleanup work to get started on. \

    Do you know if all the 4100's were sold new, with the ROPS? Again, that you for your help.
    Last edited by JD-4100; 03-30-2016 at 08:08 PM.

  10. Top | #7

    Join Date
    Jul 2015
    Last Online
    Today @ 01:37 AM
    Location
    Southern Maryland
    Posts
    17
    Thanks
    0
    Thanked 6 Times in 3 Posts
    Quote Originally Posted by JD-4100 View Post
    Thanks eastcreek. I did some more research this AM, and ordered (what I think) to be the correct manual for the 410. The number on tag is partly scraped right near the center, so the dash is where I am not sure whether there should be a number. Tag reads *W00410-007164*

    I do have the 595 page technical shop manual, so I'm good there, and I obtained a free copy of the 4100G manual (gear transmission). Mine is a hydrostatic drive, so I don't have that part of the manual, but everything else is pretty much the same.

    Today I changed the oil & filter, air filter (and checked the secondary air filter.. it was like new). Found and greased 17 grease fittings; removed the battery, wire-brushed, sanded, & primed the battery tray and surrounding metal, and fabricated a new glow-plug timer, to replace the defective OEM timer that JD wants $100 for. (I used a general purpose programmable timer that I had on hand, from my old security equipment inventory And if I didn't have one, they are less than $10 new.

    I have it set to 15 seconds, but it can be adjusted to anything from 1 sec, to 2 minutes. I think 15 sec is about right, but we'll see when the weather gets real cold again. Just need to get a plastic mini-box tomorrow, to mount it in.

    Still have more to do, but I'm anxious to get'er ready, as I have some cleanup work to get started on. \

    Do you know if all the 4100's were sold new, with the ROPS? Again, that you for your help.
    Did you get this off Craigslist on the Eastern Shore? I saw a 4100 on there a while back and it didn't have the rops. Also I just replaced my glow plug controller. It was $70 at a local marina that services yanmars.

  11. Top | #8

    Join Date
    Mar 2014
    Last Online
    08-11-2019 @ 08:38 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts
    http://www.tractorhouse.com/listings...RE&Mdltxt=4100

    Try calling a few of these places. I'm pretty sure you'll find a ROPS at one of them. Check the sub-cut forum. Someone just rolled a 1025 and avoided injury because of the ROPS. http://www.greentractortalk.com/foru...-my-1025r.html 4100's were delivered with ROPS as standard equipment.

    I think that earlier 4100's had timed glow plugs but later ones and 4110's had glow plugs that are only energized when the starter is energized. The work around is to either put it in gear or engage the PTO which will cut out the starter while you hold the key in the start position to energize the glow plugs. After 8-10 seconds or so put it in neutral or turn off the PTO and it should start right up. From the loader serial # I'd guess your tractor is a '98 or '99.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  12. The Following User Says Thank You to eastcreek For This Useful Post:

    JD-4100 (03-30-2016)

  13. Top | #9
    JD-4100's Avatar
    Join Date
    Mar 2016
    Last Online
    @
    Location
    Indian River
    Posts
    443
    Thanks
    70
    Thanked 91 Times in 55 Posts
    $70 was a good price for that timer. I never thought of checking the marina, especially around here, as they are not know for discount prices. But the Altronix time I used, soes the job, and all I will have in it, is the cost of a plastic project box and 115 about minutes.

    Oh, and yea, that's the one on CL.

  14. Top | #10
    JD-4100's Avatar
    Join Date
    Mar 2016
    Last Online
    @
    Location
    Indian River
    Posts
    443
    Thanks
    70
    Thanked 91 Times in 55 Posts
    Quote Originally Posted by eastcreek View Post
    http://www.tractorhouse.com/listings...RE&Mdltxt=4100

    Try calling a few of these places. I'm pretty sure you'll find a ROPS at one of them. Check the sub-cut forum. Someone just rolled a 1025 and avoided injury because of the ROPS. http://www.greentractortalk.com/foru...-my-1025r.html 4100's were delivered with ROPS as standard equipment.

    I think that earlier 4100's had timed glow plugs but later ones and 4110's had glow plugs that are only energized when the starter is energized. The work around is to either put it in gear or engage the PTO which will cut out the starter while you hold the key in the start position to energize the glow plugs. After 8-10 seconds or so put it in neutral or turn off the PTO and it should start right up. From the loader serial # I'd guess your tractor is a '98 or '99.
    That's a good tip on putting the tractor in gear before hitting the start switch. I have a Kubota engine in the mower, and I have to turn the key CCW, hold it for 10-15 sec, then start, so I am already use to that. I might not have installed the timer if I had thought about it.

    Did they build 4100's in 1998? Thought I read that they were only 99-01. I figured I have a 99, but now not sure. Does s/n reveal?

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •