Converted My EasyChange Oil System
Results 1 to 5 of 5
Like Tree6Likes
  • 3 Post By Kleiss1!
  • 3 Post By jgayman

Thread: Converted My EasyChange Oil System

  1. Top | #1

    Join Date
    Mar 2018
    Last Online
    08-22-2019 @ 02:49 PM
    Location
    Rogers, Ar.
    Posts
    47
    Thanks
    4
    Thanked 0 Times in 0 Posts

    Converted My EasyChange Oil System

    Recently I converted my E130 over to a regular filter and drain plug extension. Much cheaper than the $50 massive Easy Change. If anyone is interested in converting theirs to the Easy Change I’ll give you the fitting if you pay shipping. I hate to just throw it out. Thanks.
    Attached Thumbnails Attached Thumbnails 35108824-A271-4A20-AB4D-6CA6C925D124.jpeg   371D24B4-D77F-4B93-B041-D9585DFCE2B7.jpeg   9E184650-6848-401B-9F98-87BCF15D163E.jpeg  
    Gizmo2, johnH123 and Toughsox like this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 09:30 PM
    Location
    Central Pennsylvania
    Posts
    9,629
    Thanks
    362
    Thanked 1,566 Times in 1,189 Posts
    Quote Originally Posted by Kleiss1! View Post
    Recently I converted my E130 over to a regular filter and drain plug extension. Much cheaper than the $50 massive Easy Change. If anyone is interested in converting theirs to the Easy Change I’ll give you the fitting if you pay shipping. I hate to just throw it out. Thanks.
    I saw this note in the conversion documentation:

    "Because of differences in the oil pump to accommodate the Easy Change™ Oil System, the Easy Change oilfilter should not be installed on engines that were not equipped with the Easy Change oil filter from the factory."


    DRobinson, jimmylh and Toughsox like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. Top | #3

    Join Date
    Mar 2018
    Last Online
    08-22-2019 @ 02:49 PM
    Location
    Rogers, Ar.
    Posts
    47
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by jgayman View Post
    I saw this note in the conversion documentation:

    "Because of differences in the oil pump to accommodate the Easy Change™ Oil System, the Easy Change oilfilter should not be installed on engines that were not equipped with the Easy Change oil filter from the factory."


    Good to know. I didn’t know that. So I guess in the trash it goes. Thanks

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Mar 2018
    Last Online
    08-22-2019 @ 02:49 PM
    Location
    Rogers, Ar.
    Posts
    47
    Thanks
    4
    Thanked 0 Times in 0 Posts
    I didn’t think anyone would want to use this on purpose anyway.

  7. Top | #5
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 09:30 PM
    Location
    Central Pennsylvania
    Posts
    9,629
    Thanks
    362
    Thanked 1,566 Times in 1,189 Posts
    Quote Originally Posted by Kleiss1! View Post
    I didn’t think anyone would want to use this on purpose anyway.
    You are probably right about that.

    But... DON'T THROW IT AWAY.

    Put the parts on Ebay or something. I just looked it up and JD wants $106 for the EZ Change manifold and mounting bolt. Who knows, someone with an EZ Change might break their housing or something. Who knows. :-)

    You know, I'm not doubting JD's word or anything but I went back and looked at the parts for a D130 and it uses the same B&S 44N677 engine albeit with a different code. But... I also looked up the parts for the oil pump gear and they both use the same MIU12143 oil pump.

    So... what they say might be true if you went back to an older model like a LA135 but it "looks" like the EZ Change would work on a D130 engine.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  8. The Following User Says Thank You to jgayman For This Useful Post:

    Kleiss1! (08-17-2019)

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •