I bought a used z930A two summers ago. I am having trouble getting it to start now and am in need of taking it in to get serviced. My question is that how do i get it into "neutral" so that I can try to push it onto my landscape trailer? I was told that there was release under the seat. I have flipped the seat ups but can't find it. I did not get a copy of the manual when I purchased it.
Moving Machine by Hand (Using the Bypass Pump Release Valves)
IMPORTANT: Avoid damage! Transmission damage may occur if the machine is towed or moved incorrectly:
• Move machine by hand only.
• Do not use another vehicle to move machine.
• Do not tow machine.
NOTE: Both bypass pump release valves must be fully closed (pushed inward towards rear of machine) during normal vehicle operation.
When the machine needs to be moved without starting the engine, use the bypass pump release valves:
1. Lock the park brake.
2. Lift operator seat and lock into position.
IMPORTANT: Avoid damage! Damage to the transmission seals may occur if bypass valves are turned too far in the counterclockwise direction. Do not turn counterclockwise more than manufacturer recommendation.
MX42534
3. On both transmissions pull the bypass levers (A and B) outward to the open position (towards the front of the machine).
4. Unlock park brake.
5. Push machine to desired location. Due to hydraulic system drag, machine will move slowly.
6. Lock park brake.
7. Push both bypass pump release levers inward to the closed position (towards rear of the machine).
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Green Tractor Talk
1.5M posts
72K members
Since 2010
A forum community dedicated to John Deere tractor owners and enthusiasts. Come join the discussion about towing, PTO’s, reviews, attachments, modifications, troubleshooting, maintenance, and more!