F932 blowing 25 amp fuse
Results 1 to 2 of 2

Thread: F932 blowing 25 amp fuse

  1. Top | #1

    Join Date
    May 2017
    Last Online
    05-15-2017 @ 07:17 AM
    Location
    NW IN
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    F932 blowing 25 amp fuse

    After i mow for a short period of time my 25amp PTO fuse blows. i replace the key switch and TDC module. Dont see any bad wiring. Any suggestions would be approciated.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Dec 2012
    Last Online
    11-04-2019 @ 11:24 AM
    Location
    Calgary AB, Canada
    Posts
    730
    Thanks
    5
    Thanked 54 Times in 52 Posts
    Its possible your coil is starting to go. When they do they start to draw more amps. You can test it with a multi-meter by doing a OHMs reading on it. The closer it is to continuity or less than 1 the closer it is to failing. Unfortunately I don't what the spec should be. From my experience based on an AC clutch maybe 7-15 ohms?

    Actually here is a pretty good walk thru. They state 3-5ohms is acceptable for an AC clutch, I'd say our PTO clutch is probably more heavy duty so would vary.

    https://www.google.ca/url?sa=t&rct=j...GYKGvg&cad=rja

    Clicking the link should download a file, don't panic.
    F932-gas with 72" mower deck(sold)
    2720-72" mower deck with hydraulic lift, 3 valve rear SCV, loader, bucket, forks, 84" RFM, blade, 74" snow blower, box blade, land grader........
    2305- sold
    Z915B

  4. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •