Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 258 Results
  1. Implements & Attachments
    Hi there. I have a 1025R TLB on order and have no prior experience with tractors. I've read and watched quite a bit about the importance of ballast, so I'm planning to order a Heavy Hitch HH1UO offset and some suitcase weights. (8) 70 lb weights will get me to the Deere-recommended minimum of...
  2. New Member Introductions
    Hey folks. I am waiting on the final quote from my local dealer on a NEW 1025R. That 0% for 84 months is hard to pass up! Wondering if you have any tips for closing the final sale? Any attachments that you wish you bought right away (especially at 0%). Thanks! Chris
  3. Sub Compact Utility Tractors (SCUT)
    I unexpectedly became the owner of a used 2018ish 1025r last year. We got an HLA snow pusher for this winter and finally had a chance to use it today. I know little about tractors or snow pushers and it didn't go as expected. There was about 6 inches of snow. I have a 300ish foot long slightly...
  4. Sub Compact Utility Tractors (SCUT)
    Quick question. Ive been searching and can't find the answer. My 1025r has the Quick connect MMM. I am trying to install a 47" front mount snowblower. The driveshaft that came with it looks like it's meant to connect directly to the transfer case. Do I need to remove the quick mount pieces...
  5. Sub Compact Utility Tractors (SCUT)
    It’s so damn complicated, which kit(s) to buy. I recently got the JD power beyond kit (backhoe) and the JD mid mount 3rd function kit (mower) which comes with the hard line with a take off so both kits can be installed at the same time. However, I am realizing with those two, I would have to...
  6. Implements & Attachments
    Hi all! This summer, while washing and painting rusty parts on my 1025r and it’s front 47’’ blower, I accidentally rolled over my front PTO shaft. The thing is 600$ CAD at the dealer and there does not seem to be any off brand available. I didn’t see damage back then and I did not try it...
  7. Tractor & Equipment Maintenance
    Now that it is the end of the season, I am seeing spots of rust here and there on my loader, my mower deck, the tractor itself, and my brush crusher grapple. I’m looking for advice on how others work to remove spots of rust, and then repaint With a spray can of John Deere Green. I have a 1025R...
  8. Implements & Attachments
    Just removed the Backhoe today, and attached the DD RC104 Brush Mower. First time doing so. Picked up the mower with the PTO slung in a harness not hooked up, and moved it to level ground to adjust all levels. Went to hook up the PTO shaft and it's like 1" or just slightly less TOO LONG. I...
  9. For Sale
    I have a 1023e that I am parting out if any members need anything, 1025r shares a lot of the same items. It is a 2016 with 319 hours. The range shaft broke in the transmission. All plastics were taken off for another machine but there is still alot of good parts. It starts right up and engine...
  10. Sub Compact Utility Tractors (SCUT)
    Hey all. I bought my 2019 1025R from a company who treated it pretty badly. Doing the hydraulic oil transmission change today, when cleaning under the magnetic filter with my finger, I found a broken piece of something in there. The part is not magnetic (does stick to the magnet in the...
  11. Sub Compact Utility Tractors (SCUT)
    Hi everyone. Can anyone provide basic, clear instructions on how to reconnect my 260b Backhoe's hydraulics on my 1025r after I installed the Summit Hydraulics kit? I have the one that has 3 rear and 1 front remote Summit kits that works with my Power Beyond.. I'm very new to owning a tractor...
  12. Sub Compact Utility Tractors (SCUT)
    Hi all! I would like to run hydraulics lines from the usual location at the front to an easier access, less salt and rust exposed location. I have to replace my four female couplers because they are rusted out. I’ve already removed and cleaned them once, they are a pain to remove. And let’s...
  13. Implements & Attachments
    Hi all! I'm doing the yearly maintenance and prepping for winter and I am trying to find at the same time why I'm breaking 10-15 shear pins yearly. While looking at the diagram, I see that there is a bushing required between the impeller and the enclosed gear (chain) box. See #24 below. I...
  14. Hydraulics
    I am looking into the artillian diverter kit for my 2013 1025R. I see posts and videos of this kit working great on new tractors. A phone call to Artillian asking about compatibility on my 2013 got me the answer, “it should work”. Anyone put these on older tractors? Were there any manufacture...
  15. Sub Compact Utility Tractors (SCUT)
    I bought a used 2014 1025R a couple years ago, and it only came with the front loader bucket and the backhoe attachment. It did not come with the mower deck, nor did it come with the drive shaft / lift parts underneath to be able to connect one. I was okay with that at the time, because I have a...
  16. Sub Compact Utility Tractors (SCUT)
    The 90° elbow fitting is leaking on my PTO valve. It’s the one just above the PTO solenoid. I tightened the nut on the fitting as reasonably hard as I could and it did not stop the leak. Is this fitting replaceable, or do I have to take apart the entire PTO valve? I do have the Hydro-Plus kit...
  17. Trucks, Trailers, & Towing
    I'm buying a trailer soon. I'm planning on getting something 16 to 18 feet with a 10k to 14k gvwr. Some brands have angle iron crossmembers on 16 inch center. Some have channel crossmembers on 24 inch center. How would floor strength compare between those options? Do channel crossmembers...
  18. Implements & Attachments
    Hi All - Just took delivery of a CRI mini stump bucket last week and put it to use this past weekend. For anyone interested here is a quick video I did on it. So far I am super happy with it! I’ll post more in the next couple weeks as I use it more.
  19. Sub Compact Utility Tractors (SCUT)
    Anyone recommend a fan for the cab on a 1025r. I remove the bucket and ipen the front and back windows. Usually works but this week its been hot. Looking to install a fan.
  20. Sub Compact Utility Tractors (SCUT)
    I have a 2022 1025R that is not quite a year old. It has 180 Hours on it. I have done more maintenance then required and it always sleep's inside. Let me first say I love my tractor. It performs out of its weight class and constantly amazes me. But I have had many warranty issues some of...
1-20 of 258 Results
Top