Green Tractor Talk banner

1026r

  1. Sub Compact Utility Tractors (SCUT)
    Anyone who has done a fluid change on the hydrostatic on a SCUT seen plastic chunks in the reservoir where the filter screen goes? I did a fluid change on the hydrostatic in mid june, noticed that my 1026r was struggling a bit going up hill and decided that it would be a good idea to change the...
  2. Implements & Attachments
    Installing Artillian grapple using factory rear SVC This is a 1026r. My question is do I run hoses in one piece from Rear to front or do I break them near the loader quick connects to make removing loader convenient?
  3. Sub Compact Utility Tractors (SCUT)
    Hi! I seem to have a unique problem according to the Deere dealer. The MFWD lever broke off in my hand. Looks like it just cracked near the final bend. I have the part ordered, and have been looking through the Service Manual to best access the attachment point. Has anyone done this? I can't...
  4. Sub Compact Utility Tractors (SCUT)
    sent my 1026r to the dealer for spring maintenance on friday. they called me today and told me the tank is leaking around a "push fitting" and the fitting is brass? i have never seen the fitting and i can't find a picture - the tractor has less than 100hrs and i use it to mow my grass...
  5. For Sale
    Good morning! I have decided to not keep my 1025r. We moved to a smaller property and I need something more garage friendly. Located in Iowa. I bought brand new and has only been used for myself, not commercially on less than an acre. I’m looking to trade my barely used 1025r (autoconnect...
  6. Sub Compact Utility Tractors (SCUT)
    Hello All, Very grateful for help identifying the specific model of my 54D AutoConnect mower deck which I purchased when I bought my used 2012 1026R (I live in Europe - 1026R is a current model here). I'm just about to service the deck for the winter and I noticed that one of the front...
  7. 20180611_101451

    20180611_101451

    260 Backhoe
  8. 20180611_101329

    20180611_101329

    42" Woods pallet forks
  9. Lawn & Garden Tractors
    Here's a brief blog post regarding some of the main differences between the John Deere X7 Series garden tractors and 1 Series sub-compact tractors. If you are in the market, then hopefully this gives a little insight between the two. It's certainly not all-inclusive and just hits some of the...
  10. New Member Introductions
    Hi, new to the group and my favorite winter hobby is moving snow. Some folks enjoy snowmobiling..... I enjoy Deere Blowmobiling 8-) :plowsnow: Hope there's a few more women folk here 8-)
  11. Sub Compact Utility Tractors (SCUT)
    I have read thru every starting related thread I could find on here, but I'm still scratching my head on figuring out the problem with my no start issue. I was digging a trench and didn't get it all the way into Neutral position before getting up off the seat and it died. When I went to start...
  12. Sub Compact Utility Tractors (SCUT)
    Would like some help and reassurance I'm doing the right thing. Scenario is this, Cutting grass with MMM and PTO cuts off. Check temps, retry PTO switch, nothing. Move tractor to driveway, check GTT and get some ideas. Go back, jiggle wires, tap solenoid, and now it blows the 10A fuse. Dash...
  13. Sub Compact Utility Tractors (SCUT)
    Woke up this morning to a slow leak coming from the transmission, upon inspection discovered a puncture in the bottom of the transmission housing. Pretty sure I scraped a rock as can see a gouge in the housing with a slow drip of fluid. Trying to determine if the bottom of transmission housing...
  14. Sub Compact Utility Tractors (SCUT)
    Does anyone have a good procedure to align the hood on a 1 series tractor. mine rubs on the right and is way over on the left. I have loosened the rear bolts and there is some adjustment, but lord have mercy, I just seem to be able to make it worse not better. Any advice or proper procedure...
  15. Sub Compact Utility Tractors (SCUT)
    Not sure how to connect the bar for my autoconnect deck on my 1026r? Which way does the bolt go on the bar? Its chewing up my deck from the first few years use? Does it go the other way, if so what purpose does it serve? So just the spring connects it? Not sure the pictures uploaded? Thanks for...
  16. Sub Compact Utility Tractors (SCUT)
    Good Morning All! A few members asked about the JD LED work lights that I opted for on my 1025r, and I said I would start a new thread with some additional pics. Here they are! I really like them, but the current position is under the hazard lights, which I'm not sure if I'm getting the most...
  17. Sub Compact Utility Tractors (SCUT)
    Just placed the order for the new Green Machine! Took a while to thrash out the spec, after discussion with two local dealers. Although the final price was close within £1000 the local dealer won through due to convenience and logistics. Highly recommend Magregor Supplies in Inverness and Double...
  18. New Member Introductions
    Good morning, I'm new to your site.... Yesterday I spent half a day with the local JD dealer discussing the pro's and Con's of a JD1026R. This is the spec that we were discussing..... 1026 R (New from factory) 54"auto connect deck (Smaller deck to fit around some trees close to boundary) 3PH...
  19. Sub Compact Utility Tractors (SCUT)
    Ifinally got feed up hearing my deck rattle, it was driving me nuts!! I traced the noise to be coming from the belt pulley. The movement of the pulley was consistentwith the rattle I was hearing. What I did to fix it, was add more tension tothe pulley by adding a second spring (See Pictures).I...
  20. Sub Compact Utility Tractors (SCUT)
    Hello from the bitter cold of Northern Ohio. Yesterday, we had +40 MPH gusts and blew a 3ft drift down my entire driveway. Good time. Anyway to get it all cleaned up and hopefully avoid in the future. I took off my 54 Plow and attached the bucket. I am using the amazing Artiallian Plow adapter...
Top