Green Tractor Talk banner

2025r

  1. H130 loader?

    Wanted to Buy
    I just got a 2014 2025r with 240 hours on it but I'm having a heck of a time finding an H130 loader and mounting frames for it. I live in northern Michigan. Anyone have or know where I can find them? Thanks.
  2. Hello all: First post - need some advice

    New Member Introductions
    Hello all from Pennsylvania: Although I've been a member since 2016 when I bought a 1025R, I've never posted anything. I'm more of the sit back read kind of guy rather than a poster. However, now I need some advice. I am looking at trading my 1025R with FEL/Backhoe in on a 2025R with...
  3. Trying to set up the rake on my rotary cutter but I'm out of toplink. what do?

    Implements & Attachments
    I have a 2025r with a factory installed backhoe, my 3 point came in a box. I installed the 3 point, leveled it using the adjustable side link. I connected the rotary cutter and went to adjust the rake, 2" higher in the back than the front and immediately ran into a problem, my toplink is all...
  4. 2025r three point hitch issue

    Medium Frame Compact Utility Tractors (MCUT)
    Hi guys, Just got my 2025r, it came with the backhoe attached. I'm putting on the three point hitch for the first time, and I'm pretty sure they gave me the wrong center link. The pin will not go all the way through the bracket on the tractor, and the shaft is too thick to rest in the storage...
  5. 2019 2025r Hydostatic Pedal Return

    Medium Frame Compact Utility Tractors (MCUT)
    Hope everyone is doing well! Been a member of this forum for some time and hoping our community can provide some insight on new Deere Hydrostatic Pedals. I have just received delivery of my new 2025R (very excited and put 2 hours on it over the weekend)! I've noted doing some "necessary"...
  6. My 1025r for your X758

    For Sale
    Good morning! I have decided to not keep my 1025r. We moved to a smaller property and I need something more garage friendly. Located in Iowa. I bought brand new and has only been used for myself, not commercially on less than an acre. I’m looking to trade my barely used 1025r (autoconnect...
  7. Anyone fitted a Fire Extinguisher to a 2025R?

    Medium Frame Compact Utility Tractors (MCUT)
    Had my new 2025R delivered Today. Couple of questions. Wonder if anyone can tell me what the small bracket on the Left ROPS post is for? Has anyone attached a fire extinguisher to their 2025R and if so where? Thanks MarkMiles
  8. 260b the same for the1025r and 2025r

    Implements & Attachments
    I purchased a 2025r tractor backhoe and my dealer has had trouble getting a 260B for my 2025r he tells me he contacted John Deere and the backhoes short of some mounting brackets are the same for the 1025 and 2025 is that true? It would change my delivery date by a month and I really would like...
  9. Newbie

    New Member Introductions
    Just wanted to say a quick hello and introduce myself. I don't have a green machine yet but I recently acquired a few acres that I will need to take care of. I began looking for a small mower but my search has migrated towards a compact tractor, specifically a 2025r or 2032r. I am new to the...
  10. 2025R Massive oil leak

    Sub Compact Utility Tractors (SCUT)
    :brokeheart::brokeheart: Bought Green Deer used in Nov 17. 60 hr on it and looked new, now with 190 hr it is ready for the salvage yard. The FEL will not raise more the 12" but lags the motor like oil is being put to both sides of cylinder at once. going down there is only gravity. Once down I...
  11. John Deere 2025r: What Parts Go With The Mower Deck?

    Implements & Attachments
    I have a guy trading in a 62" belly mower off of his 2015 2025r. He's about 3 hours away and I don't have any 2025r's here to look at. Wondering what all parts he needs to bring? Front and rear hangers. If I recall, there's also a front section that gets bolted to the frame which the hanger...
  12. 2018 2025R TLB picked up March 26 First impressions compared to 1025R TLB

    Medium Frame Compact Utility Tractors (MCUT)
    I also am enjoying my new tractor. About the hydraulic speed my dealer had both 2018 1025R as well as 2025R running and we compared the loader lift speeds at the same throttle setting and they seemed identicle. Also I have found there lift cap on the exact same load which I was just able to lift...
  13. Front Quick hitch from x series to 2025r?

    Medium Frame Compact Utility Tractors (MCUT)
    Another plea to the GTT braintrust: I'm hoping to use the front qh snow blade from my x485 on my '13 2025r. I changed the bracket on the frame to make it qh compatible by removing the non-qh MMM hangers that came with it and installed LVB24895 for my MMM and front blade: I got a replacement...
  14. No lift after fluid change - 2013 2025r

    Hydraulics
    A request for advice from the GTT braintrust: So I wanted to change the hydraulic fluid on my tractor. It has 310 hours on it now, and according to records that came with it, the first change was done by the prior owner at 63 hours. The machine appears to have been well maintained and...
  15. Cheap 2025r Seat Upgrade

    Medium Frame Compact Utility Tractors (MCUT)
    Hello I just wanted to take a minute and share my attempt to upgrade my seat on my 2025r. I had previously bought the Michigan suspension seat from Northern Tool but for me it raised the seat to high for me to not have to be bent over driving. (I am 6'6") I blogged about it here: John Deere...
  16. 2025R with Post hole digger PHD200

    Medium Frame Compact Utility Tractors (MCUT)
    Hello everyone. I am new to posting so I hope that I am doing this correctly. I currently own a 2016 2025R and am investigating the purchase of a post hole digger. I have researched the PHD's and found that the PHD200 will fit my tractor. What concerns me the most is that I plan on creating an...
  17. 2025r box blade size?

    Implements & Attachments
    I'm looking at purchasing a box blade but I'm not sure if I should get a 4 or 5 footer , the main reason I'm looking at a 5 footer is because the tsc county line 5' box blade is cheaper than the 4' frontier blade...... Which size is best for a 2025r running r4 tires in Rocky sandy terrain?
  18. 2015 2025r Cab almost complete, LET IT SNOW!

    Medium Frame Compact Utility Tractors (MCUT)
    Here are some pictures of my 2015 2025r. I still have to install the heater, 12v fan, an LED mini light bar from Strobes N More on the cab and maybe some type of radio. Second to last picture is of a custom bracket I had made to hold the valve body. The last picture is how the dealership I...
  19. Bucket for 2025R with 270a backhoe

    Implements & Attachments
    I'm a new member in the process of ordering my new 20205R with 270a and was hoping to get some real-world feedback related to bucket size on the tractor/backhoe combination. I plan to do a variety of tasks with my new backhoe: running 4" downspout pipe, digging out footers for new french...
Top