Hi, I got aquiline MPC chains size 14-17.5 for my 2021 2032r with R4 tires. When I put them on, the outside and inside chains are super loose even at the maximum tightness setting. First pic here you can see me pulling the slack away from the tire. So that’s the side chain situation, now...

Hello, I have noticed this spring at times my power steering gets a little sluggish, stiff to turn the steering wheel. Not like it's lost it's power steering, but enough that you notice it a tad. This is when I am brush hogging. I have the tractor in Low and the RPM at the 540-560 level. So the...

Question, I knew about the RIO safety switch shutting off the mower deck on the riding tractors, but my new 2032R is getting the engine killed by it, as full throttle, if I forget to activate the button. My dealer says that is normal, and told me they are designed that way. None of the smaller...

Hi All … I'm new here…my loader bucket won’t curl backward any longer. I have reseated the hoses with the couplers several times with no luck. switched the hoses around. It curled back when plugged into the curl forward port. It feels like it's a joystick issue? Basically the joystick has three...

Need some advice here. I read lots of threads on the subject of trading up from a 1025r to something bigger. There are conversations about more HP or lift capacity but not much about comfort which is my issue. I use the 1025r to cut 4 acres of grass with about 2 manicured and the other 2...

I bought a new 2032R in spring of 2018 and added 60D Autoconnect MMM. As I got ready for another mowing season last week, I got the dreaded HOC 517160.03 code on the dash and was unable to load the MMM. A friendly mechanic at the local dealer was able to INSTANTLY tell me the problem because he...

I got a quote from my dealer on a 2038R back at the end of August of 2020. I knew it would be several months before I was in the position to pull the trigger on the tractor due to going through a refinance on the house. Fast forward till now and I got an updated quote from the dealer on a 2021...

I sold a very nice little Massey gc2400 that would throw snow 80'. This bigger more powerful JD throws it about 10'. I tried loading the blower heavy with a good row from the rear blade first, going faster, slower, nothing makes much of a difference. There is about 4-6" of fresh snow, not real...

Since purchasing my 2023R new in March I've been unable to get the rate of drop knob to turn...at all. I called the dealer and they asked me to bring it in but I don't have access to a trailer to haul it in at this time. I've tried the simple things like spraying some WD40 on it to pulling the...

2019 60D AutoConnect mid-mount mower that fits MY17+ 2032R / 2038R. Includes mounting lift hardware as well as command cut knobs. The deck has only five mowings on it and is in excellent physical and mechanical shape. Selling because I upgraded to a 72D. Asking $2650.00 Located in central...

A new one is over $200. I am hoping someone has one laying around that they would let go of for much cheaper. I believe a TCA23807 will fit. Not sure about others. Thanks!

Hello, Thank you to our hosts and moderators very happy to be part of this community. We have a 21 year old 345 with 48" deck, powerflow, 7 bushel, 10 Trailer Looking to setup for snow removal, would love insights We also have a 2015 2032r with a 46 hoe and H130/200cx loader, Frontier 48...

Does anyone know if the hardware from a 60D autoconnect will directly fit a 72D autoconnect? I'm looking at swapping out my 60D and the 72D at the dealer (slightly used) doesn't have any linkage parts. Would the 72D hook up to my existing hardware? Thanks.

Looking for some advice/help. Purchased a new 2032r recently. Went to use the PTO and it doesn't turn on. Working with the dealer and the tractor is there now but I would like to understand the issue better. The error on the display is "PTO Solenoid Fault". I unhooked the PTO Solenoid and...

I have a brand new set of loader mounting frames that will fit the 2017 and newer 2032R and 2038R tractors. These mounting frames have never been installed and came from a new 220R loader. New price for the set from the dealership is $480. I'm asking $300 (reduced from $400) and I’m located in...

I just bought a 2013 2032R diesel; 245 hours. I used it to move some dirt around Friday, parked it, tried to start it Sunday and it won't crank. Dash lights up, glow plug light comes on then goes off. There is a buzz sound coming from behind the dash. If I turn the key to start it doesn't...

This is an update to original thread by @Big here (2017 2032r Caution!) where his issue was found on the same model i have the 2017 2032R, but others comment there as well as a number of other forums I'm on that this issue has been found on many other tractors for quite some time. Intent here...

Just wondering if anyone has come across any good auxiliary warning lights for mounting on the ROPS for extra warning in addition to Mfg flashers? I often do work at the end of my driveway which is on a US highway and although the speed limit is only 35, people fly by. Any additional 360...

I've been reading the 2032R vs. 2038R threads. What I'm faced with is using a tractor with loader and backhoe to repair a pond dam. It has eroded on the down side over the decades. The top is narrow and looks unstable (cracks). I'm thinking of getting one of the 2 series, digging into the close...

have a new 2032r with auto connect mid mount mower. the arms are up tight to the machine in highest position but the computer registers their height at the lowest install position. The arms refuse to lower at the command of the lever. After contacting the dealer, they walked me through a...