Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-15 of 15 Results
  1. For Sale
    I have some misc parts left over from a 2015 2025r that was parted out. Some examples of what i have Front axle assembly complete (No rims or tires) Rops Steering valve and shaft RPM cluster and dash panel 3pt hitch assembly Most of the internal transmission gears Possibly the hydraulic deck...
  2. Wanted to Buy
    Made a classic newbie mistake. I wanted a compact tractor with a backhoe, I found a low hours 2320 without a back hoe. I asked John Deere dealer what backhoe fit the 2320 and was told the 46 Backhoe was the correct one to fit on a 2007 John Deere 2320 tractor but I would need a power beyond...
  3. New Member Introductions
    Hi everyone, Racqune here. Just a quick intro... I'm a recent transplant city-dweller now living on 5 acres in Yacolt WA (SW Washington). I really appreciate this forum and all of the knowledge and wisdom from contributors I have been reading here. I have repaired various types of machinery...
  4. New Member Introductions
    New to me 2009 2320, previous owner uninstalled the Mid Mount Mower lift hydraulic ram and linkages. Need to reinstall but not certain how it goes together. No luck in finding online info so wondering if anybody has the installation instruction sheet. Thanks.
  5. Implements & Attachments
    Hi all, I have owned a 2320 for a few years and I am looking for a loader. I cant find a 200CX loader but a 120R loader has come up for sale near me. I read on here that a 220R loader can be made to fit so I was wondering if I could do the same with a 120R loader and if so what kit/extra parts...
  6. Medium Frame Compact Utility Tractors (MCUT)
    Just got a 2011 2320, from a family member, with 11 hours that has been stored since new. What maintenance should I do before using? Work done so far; drained fuel and replaced with fresh. Installed new battery and aired up tires. Has a pin on bucket, will be looking to change to a quick...
  7. Medium Frame Compact Utility Tractors (MCUT)
    I was wondering if anyone uses a JD 2320 for snow blowing and mowing? I just purchased a house on 8 acres with about 3 acres of mowable yard and a 572ft paved driveway. Does the tractor have enough power to snow blow Northern PA winters and is it compact enough to mow a flat and pretty open 3...
  8. Medium Frame Compact Utility Tractors (MCUT)
    I had the dreaded u joint failure with a $3700 repair. However, since the fix I have significant neutral creep forward going on. I apologize that I can’t find a thread explaining adjustments. I am several miles away from the dealer that fixed it (long story). Can someone lead me to a link on how...
  9. Medium Frame Compact Utility Tractors (MCUT)
    This made greasing the infamous u-joint on 2320 a breeze today. See Photos Below. I found this swivel coupler for my grease gun at Ace Hardware. I just added it to my flexible hose with a 1/8 brass pipe coupler. This rigg snapped right onto both zerks. I cannot stress enough how much easier it...
  10. Medium Frame Compact Utility Tractors (MCUT)
    Back again. So the grass got tall while I was dealing with the hydraulic pipe repair. The MFWD shaft got completely wound up in grass. Took an hour to clean out. Now i’m worried about the front seal as I thought I saw something drip from that location. I can’t seem to locate the right diagram...
  11. Medium Frame Compact Utility Tractors (MCUT)
    Snagged a root with the hydraulic line (part #LVA802862) coming of the outside of my filter. It pulled out of its bracket and into my u-joint which promptly wore a hole into it. Got the replacement pipe in from my local dealer and started digging into the tractor to remove offending part but I...
  12. Large Frame Compact Utility Tractors (LCUT)
    I am considering purchase of a JD 3320 or a 2320. I have hard soil on my property and I am concerned about the capability of the 2320 backhoe, which is the John Deere 46. The 2320 will be $17,000. If I purchase the 3320 instead I'd have to add a backhoe. I understand that should be the 375...
  13. Medium Frame Compact Utility Tractors (MCUT)
    Another plea to the GTT braintrust: I'm hoping to use the front qh snow blade from my x485 on my '13 2025r. I changed the bracket on the frame to make it qh compatible by removing the non-qh MMM hangers that came with it and installed LVB24895 for my MMM and front blade: I got a replacement...
  14. Hydraulics
    A request for advice from the GTT braintrust: So I wanted to change the hydraulic fluid on my tractor. It has 310 hours on it now, and according to records that came with it, the first change was done by the prior owner at 63 hours. The machine appears to have been well maintained and...
  15. Medium Frame Compact Utility Tractors (MCUT)
    I'm a newbie and tried searching b4 posting.... Just bought a 2320 and really like the machine so far. Lots of dust and pollen on the grill so i tried to lift the hood. Hood guard does not allow the hood to go up very high - what's up with that? It will be nearly impossible to hose off the...
1-15 of 15 Results
Top