Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 22 Results
  1. Large Frame Compact Utility Tractors (LCUT)
    I am working on a neighbors tractor. Long story short - it is 2016 3032e with approx 1950 hours. She (owner) does not know when it was last serviced, due to it having been her now ex husbands. Anyway I am going to change the engine oil and filter. I was checking the other fluids and the...
  2. Large Frame Compact Utility Tractors (LCUT)
    I have a 2020 3032E where the Rockshaft controls are not operating the 3PH properly. The Rockshaft lever holds the 3PH in position at ~7 on the sticker. It will raise the 3PH if I pull the lever a bit back. It will let let the 3PH fall if I push it a bit forward. So its not dropping to a set...
  3. Large Frame Compact Utility Tractors (LCUT)
    Does any one have a comprehensive torq chart for a 3032e recently took the rest axel casing off, putting it back on this weekend and I’m having a hard time finding the torq values. If anyone has them I would appreciate it. Thanks
  4. Implements & Attachments
    After I got the ballast box I debated, even involved my wife in the discussion of what I should fill the ballast box with. I’ve been surfing Facebook because I want the weight to be removable, not for any particular reason other than the fact that I hate single use tools. So I found some large...
  5. Large Frame Compact Utility Tractors (LCUT)
    Hello all was looking under the tractor yesterday and noticed the back right tire was covered in hydro fluid so I assume I have a bad axel seal. That being said I’m a pretty competent mechanic, but have never messed with tractors. does anyone have any experience in replacing this component I’m...
  6. Large Frame Compact Utility Tractors (LCUT)
    Before I became an active member I scanned thru multiple threads about replacing the lower turn buckles on my tractor. Someone on the forum makes those if I’m not mistaken I would appreciate being led in the correct direction. thanks.
  7. Large Frame Compact Utility Tractors (LCUT)
    I had 3 of the 4 loader bolts on the left side snap. Currently in the process of replacing those but I stumbled upon my driveshaft has been rubbing on the housing surrounding it. I’m assuming the front axle has shifted. What is the best way to determine how to get the alignment corrected?
  8. Implements & Attachments
    Hey guys recently picked up my 3032e and love it. Just looking at attachments and was wondering what kind of tillers you guys are running. I honestly don’t even know where to begin being new to the tractor world. Thanks Tommy.
  9. Large Frame Compact Utility Tractors (LCUT)
    Yep, I've read another (older) post here with the same title but dont feel there's an answer for me there. I'm in the last day or two of trying to decide between a (new) 3032E vs a 3038E. To me, the difference in cost is small enough in the scale of the expense of either model that cost is not...
  10. Large Frame Compact Utility Tractors (LCUT)
    Picked up a 2017 3032e just south of Memphis this past weekend. Has 496 hours on the tractor , only 34 of which have been pto hours. Figure I got a pretty good deal on it, for 14,000 out the door. Separately I picked up a mx5 John deer rotary cutter, that had under 8 ( the person selling said)...
  11. Large Frame Compact Utility Tractors (LCUT)
    Just driving along, operating a box blade when the tractor shut off. Oil pressure warning light and battery light flashed on dash, but oil looked great. I added more coolant, since that was low, no change. She’s stuck out in the field and I’m stumped. The lights were not flashing before, when...
  12. Implements & Attachments
    Has anyone had their boom "float" modified by the dealer without them telling you? I took my 370b in to have the boom cylinder rebuilt under warratny. Before I took it in I could push the boom control all the way forward and it would stay in the "detent" position. After I got it back I now have...
  13. Implements & Attachments
    Has anyone figured out how much of a cubic yard fits in the bucket on the 300E loader?
  14. Large Frame Compact Utility Tractors (LCUT)
    Problem: 3032 has 160 hours. Out of blue tractor idles extremely rough and STOP displays in dash. Noticed the problem directly after bush hogging and problem originally was intermitten. Bow it has become permanent. Ive never ran it a few seconds longer than the dash saying to stop. I feel like...
  15. Large Frame Compact Utility Tractors (LCUT)
    Hello everyone, I have a 9yo 3032e with a 305 loader, 750 hours. she has served me very well, I love this tractor. recently I noticed the front spindle seals leaking most.y from the LHS and decided to change them. I jacked up the tractor took off the wheels, drain the oil but soon as the...
  16. Tractor & Equipment Maintenance
    Hello all! First time poster and tractor owner, and loving my machine! That being said, the owners manual really should have a “master list” of all grease fittings, however they do not at least in one easy section. Does anybody have such a thing? My worst fear is that while doing regular...
  17. Large Frame Compact Utility Tractors (LCUT)
    Has anyone installed a Summit Hydraulics diverter valve on a 3032E? I’m trying to figure out where to mount it. The loader frame doesn’t allow the Summit clamp mount to work as it does on a removable loader frame. Any pics or ideas are appreciated.
  18. Implements & Attachments
    What is a good width for a grapple to be used on a 3032E? I’ve looked at several and watched several videos but haven’t found a good comparison between widths.
  19. Medium Frame Compact Utility Tractors (MCUT)
    Hello everyone! I’m currently deciding between two used tractors: a 2015 2025r with a mower and a 2016 3032e, those are actually the only options available in the area. Compact tractors are not very popular where I live in. I have a landscape architecture company and this machine will be used...
  20. Large Frame Compact Utility Tractors (LCUT)
    My old Ford 8N (no FEL) feels like a sports car with its low COG. Most of my 15 acre pasture is sloped one direction or another and i never got the cheek clench on the 8N like I do the new 3032e. Seems like the smallest changes are magnified up in the seat and I find myself sliding to one side...
1-20 of 22 Results
Top