Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-12 of 12 Results
  1. Wanted to Buy
    I am somewhat hesitant to start this thread. I am looking for another "needle in the haystack". I want to upgrade from my 4200 to a similar size CUT but with more power. I do not want anything with emissions aftertreatment. Many of you have these newer tractors without issues but I don't...
  2. Large Frame Compact Utility Tractors (LCUT)
    Total newb here. Was trying to push a little snow the other day with my 300cx loader. I am familiar with Kubota float function to the stick, just push it past full forward and the fel goes into float. my question is, how do you do this on the 3520? The FEL manual says see the tractor manual...
  3. Large Frame Compact Utility Tractors (LCUT)
    I just purchased a used 2012 3520 with 155 hours on it. I am now going through the owners manual and checking all maintenance that needs to be done now and at 200 hours. Based on the owners manual and looking over the tractor, I can only find 3 zerts that need to be greases and they are all on...
  4. Large Frame Compact Utility Tractors (LCUT)
    I just bought a 2012 3520 with loader and 72D mower. Brought it home and wanted to take off the mower because it's winter and I want to push snow from a heated cab tractor instead of freezing my behind off as I've done for so many years!! I couldn't get the belly mower to drop down to unhook...
  5. Medium Frame Compact Utility Tractors (MCUT)
    Hello, new here. I rolled my 3520 onto its right side. Thank you Hancock properties. I am ok, wearing seat belt and just grabbed the left oh **** handle & went for a ride. It’s upright, oil cleared from cylinders, bucket goes up & down, tilt fine? Steering works fine. It will not move. Checked...
  6. Implements & Attachments
    I have a 485 JD backhoe mounted on a 3520 JD tractor. Since day one the primary boom moves up and down as well as left and right just WAY TOO FAST. I put up with it for a long time assuming operator error but as time passes I'm growing tired of looking like a hurky jerky operator. The other...
  7. Large Frame Compact Utility Tractors (LCUT)
    The 3-Point on my 3520 (2007, 1500 hours) has developed a problem where it will sag at a fairly fast rate. I typically keep a weight box on it and if the tractor is shut off, it will drop 1" per minute. If the tractor is running, it will adjust up about every 30 seconds to keep the set height...
  8. For Sale
    Hi GTT friends, I have for sale the Rock Shaft Assist mounting kit LVB25611 for sale. It's brand new old stock, with some dust and marks from storage. Retails for about $1200 plus freight in Aust, I'm asking $800 plus freight. If you would like to fit a 48, 448 or 485 backhoe to your 3X20...
  9. For Sale
    2013 John Deere 3520 Only 116 Hours. 300CX Loader, Always garaged. Runs excellent. 73" HD loader bucket Asking 20,500
  10. Large Frame Compact Utility Tractors (LCUT)
    I recently acquired a 3520 with 1400 hours and while the power steering works fine, I noticed that the steering wheel slowly drifts counter clockwise. I hadn't noticed this working in the yard, but I had to drive it a couple miles on the road, and became obvious then. Maybe a whole rotation in...
  11. New Member Introductions
    Hello from Missouri to all. Been driving Deeres for some years now. I have a Gator TX and a 2305 for 5 years now and just picked up a 3520 last week.
  12. Large Frame Compact Utility Tractors (LCUT)
    I purchased a used 3520 with the 72", non drive over, belly mower. The clearance on the deck has been terrible and creates tons of issues when using the loader, so I checked out the online manual for the deck. I quickly realized the manual said. draft arms should be installed on the front hole...
1-12 of 12 Results
Top