Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-11 of 11 Results
  1. Implements & Attachments
    A little long winded here, but the questions will pop up at the end :) I was reading through the loader manual (440R) and had some questions. Specifically, the loader manual has the following for minimum ballast: 63 inch or greater rear tread setting Rear tires filled with liquid ballast Four...
  2. Large Frame Compact Utility Tractors (LCUT)
    I know everyone here is probably sick of “which one should I buy” threads. I’ve been reading many of those threads on this forum and enjoy learning. I want to take a moment to introduce myself so you know my experience and why I’m here. Sorry for the long post. Feel free to skip to the...
  3. Large Frame Compact Utility Tractors (LCUT)
    This is my first post, but I've been reading GTT since buying my John Deere 4066R cab tractor a year ago. Any time I have a question or problem this is the first place that I look for a solution. I have been thinking about adding cameras to my tractor since buying it. My truck has front, rear...
  4. Medium Frame Compact Utility Tractors (MCUT)
    Hi, does anyone know the process to engage the rear pto of a 4066r while off the seat. I accidentally did it one day, but I can't work out how to do it again. I need to engage it to operate the hand sprayer from a pto sprayer rig. Thanks
  5. Implements & Attachments
    Hi, I just purchased a 4066r. I'm doing some contract slashing with my 5ft 40hp kanga slasher, but would like more productivity as my last job was 200 acres on a solar farm. Would the 4066 run an 8ft slasher? Thanks
  6. Large Frame Compact Utility Tractors (LCUT)
    I just bought a brand new 4066r OOS and had the dealer install the 4th/5th SCV. I do not have a loader or 3rd SCV. When I lift my 3 point hitch with a heavy (+/- 1,000lb) arena drag on it, I am hearing a grinding noise from the 4th/5th SCV valve (by my right shoulder mounted on the ROPS) as the...
  7. Large Frame Compact Utility Tractors (LCUT)
    Just had a 3rd function added to my 4066R. This was a JD kit and it has 1/4 couplers. Also got a 60 Wicked grapple which has 3/8 couplers. Finding 3/8 couplers for the JD is pain. The thread on the hard lines are 9/16 - 18. So I needed a 3/8 couple with 9/16 thread. I did find them under the...
  8. Large Frame Compact Utility Tractors (LCUT)
    Tractor: 4066R Cab Hydrostatic 4WD with two rear remotes, 180H loader with the third SCV routed for front grapple attachment. I tried to use a rear remote for the first time on the tractor to a wood splitter. I wasn't having much success, and it was very slow. May have Bumped on or HIT both...
  9. Large Frame Compact Utility Tractors (LCUT)
    Hooked a pine branch yesterday while snowblowing at -15 degrees. The rubber antenna did not flex at all (stiff as a board at that temp) but wound up breaking the pot metal connection clean off the base. Only way to fix is replace with entire new cable assembly. Does anyone know if it is...
  10. Implements & Attachments
    Took delivery of a 10ft Unvenferth Perfecta 10 Field Cultivator with diagonal leveling bar and 12" rolling baskets for fertilizer incorporation and final seedbed preparations. They actually delivered the wrong model, as I originally ordered a Perfecta 12 instead of Perfecta 10, but I'm not sure...
  11. Large Frame Compact Utility Tractors (LCUT)
    I'm scouring all over North America for a new (preferably) or very good used two bottom rollover plough. Since I am having trouble finding one does anyone know if a three bottom rollover by a manufacturer such as Kverneland would be too heavy for the 4066R?
1-11 of 11 Results