Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 39 Results
  1. For Sale
    I am helping my father in law sell his John Deere 270B Backhoe off his 2038R. It has never been used and is in completely new condition. It has been installed on the tractor to confirm everything works. The unit is under a transferrable warranty until 12/16/22. The reason for sale is that he...
  2. Implements & Attachments
    So I was digging out a stump with the bucket curled in while pulling and lifting the boom and this happened. Anyone ever put a pressure relief valve on or a higher tensile strength rod?
  3. Utility Tractors
    Recently puchased 2006 JD 5425, and wish to buy a subframe mount backhoe. The only BH I have seen that works is the model 49. I am ok with the specs on this BH but would like to consider other brands or JD BHs like the 595. How to get from here to there? I know the Power Beyond unit is...
  4. Large Frame Compact Utility Tractors (LCUT)
    Hi All - I currently have a 2017 4052R that I am looking to put a backhoe on. I found a backhoe with subframe mount on a 2017 4044M. Does anyone know if the subframe mount from the 4044M is compatible with the 4052R? Or is there a difference in subframe mounts between the 'M' and 'R' models...
  5. Implements & Attachments
    How do you like the hydraulic thumb on the 2x0B series backhoes? Specifically: the JD sales people tell me the switch on the boom is "either or": either it routes all hydraulic fluid to the bucket, or to the thumb, but not to both simultaneously. However, the TTWT videos I have seen appear...
  6. Implements & Attachments
    I have a 2021 1025R with a power beyond. I use a JD iMatch on my three point hitch. I want to add the following to the back of the tractor: backhoe top & tilt TTWT rear hydraulic kit Here's the question: Does anyone out there have a backhoe, top and tilt, and iMatch on the back of their...
  7. Implements & Attachments
    Has anyone had their boom "float" modified by the dealer without them telling you? I took my 370b in to have the boom cylinder rebuilt under warratny. Before I took it in I could push the boom control all the way forward and it would stay in the "detent" position. After I got it back I now have...
  8. Implements & Attachments
    I added worklights to my 260B. This is a write up on how I did it. I mounted the two worklights to the bracket that mounts the Hydraulic thumb valve in the deer kit. See pictures. I took the power and ground from both lights and twisted them together and put them in a butt connector. I then...
  9. Implements & Attachments
    I have a 485 JD backhoe mounted on a 3520 JD tractor. Since day one the primary boom moves up and down as well as left and right just WAY TOO FAST. I put up with it for a long time assuming operator error but as time passes I'm growing tired of looking like a hurky jerky operator. The other...
  10. Large Frame Compact Utility Tractors (LCUT)
    Greetings I just purchased a 2005 4520 open station and I am looking to put a backhoe on it. I have seen a few 48 for sale with mounts for a 4400 on it. Would this fit on my tractor? If not what parts do I need for 48 or 485 to mount Thanks in advance
  11. Implements & Attachments
    Introduction Here is the saga of my backhoe install. It’s pretty long, but I hope that future readers will see that it’s possible to keep these older tractors working if you do the research. Keep in mind when you look at pricing, that the Australian dollar values are roughly double the USD when...
  12. Large Frame Compact Utility Tractors (LCUT)
    I’m a newly retired guy. I’m shopping for what is likely to be the last tractor I will buy in this lifetime…so I’m treating myself. My best prospect right now is a new 4052R with a cab and a backhoe. I keep about 15 acres cleared with a bush hog, have landscaping projects planned for the...
  13. Implements & Attachments
    Hi All - Finally settled on a 2038R and feeling really confident after a major back and forth! Now I am faced with the dilemma of the backhoe. I really want to get it and have plenty of need for it, but I can't figure out what's best. I can buy it in the initial order and roll it into the...
  14. Implements & Attachments
    Finally getting around to doing some maintenance on my 48 Backhoe that came as a package deal after letting the Brother-in-Law borrow it last fall. I notice that two of the grease fittings wont take grease. And that the retainer pins that go thru the pins are broke. How hard is it to remove the...
  15. Sub Compact Utility Tractors (SCUT)
    Both of my taillights were broken because of branches. I have a backhoe so putting them inside the ROPS wasn't an option and I didn't feel like giving our local JD dealer 200$ for every pair of taillights I would knock out in the future. I bought these on eBay. 2X LED Tail Lights Car Truck...
  16. Large Frame Compact Utility Tractors (LCUT)
    Hello everyone. I recently had a chance to use my brand new 485 backhoe that is attached to my 2006 4120. The hoe has a production date of 2018 but still brand new unused condition. I am noticing something that I dont think is normal. When I crowd the bucket from the teeth tips straight up and...
  17. Implements & Attachments
    Greetings: I just purchased a 1025r with a 260B backhoe attachment. The float function on the boom bypasses all the oil in the open center valve block rendering it useless. It is impossible to to move the stick or curl the bucket. Surely this cant be the design of the valve block. The 120r...
  18. Utility Tractors
    Hey, guys I'm looking to hook up a 3 pt. Wallenstein GX920 backhoe to my 5045e. Will I need a power beyond kit to run this backhoe? Or will the std. rear scv run this sufficiently with out any over-heating or any digging performance to suffer, like slow speed, low power, etc. If I do need the...
  19. Implements & Attachments
    Wanted to make a post about a pretty simple model 46 backhoe that i made, just in case anyone is looking for ideas when trying to make their own. I sized the height of it so that I could keep the backhoe pins (ones used to avoid leak down, not the subframe pins) in to keep the hydraulic...
  20. Implements & Attachments
    Just purchased a new 2019 3046R with a factory Cab. The dealership is having a lot of issues installing the "new" backhoe. I'm being told that this tractor is brand new, and a half year upgraded model - as such, the backhoe (which was designed to fit the previous 3 series before the latest...
1-20 of 39 Results
Top