Looking for help on how to remove the hydraulic pump assembly from a 250 skid steer.

Hello experts, need some help. Trying to connect my 47” snowblower to my x728 tractor. Was able to get 3 of the 4 hydraulic connections on but the 4th has too much pressure. Is there a relief valve or tool or some other trick I can use? Thanks much in advance!

Father in law has a 2305 that sheared the hydrostatic upper shaft on the pump. Broke the u-joint and fan on the shaft. Replaced the u-joints, fan, hydrostatic pump case, upper shaft, bearing and seals. When adding fluid, I get fluid in the sight glass after adding about 3 gallons. 3 point...

Hi all (again), Just had the steering column spring a bit a leak ( understatement, sizable amount of fluid gysered out and leaked onto deck, hopefully not killing too much of the grass). Am I going to have replace the whole steering column or does it make more sense to replace the seals inside...

I had pallet forks attached to my h120 loader. I was pushing brush with the forks in the down position. The strain broke the black hydraulic hose. Replaced hose and bucket will not tilt up when I move the control to the left. If you very carefully nudge the control to the left, you can get...