Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. Medium Frame Compact Utility Tractors (MCUT)
    Thank you for the advice guys.
  2. Medium Frame Compact Utility Tractors (MCUT)
    Front loader won't go down when I push it to go down it bogs motor It does go down if I put it in float but very very slow or if I push forward a tiny bit but slow slow swapped hoses with the curl and up and down works fine but then the curl don't Any help would be appreciated thanks
  3. Lawn & Garden Tractors
    I bought this 2009 X700 tractor in the summer and the previous owner demonstrated at that time that the plow worked with the quick hitch going up/down and left/right. Now that it's winter and I swapped the mowing deck for the plow, I'm having trouble getting the up/down controls on the plow to...
  4. Utility Tractors
    I am about at my wits end. About 3 years ago I picked up an 82 John Deere 2040 with a 145 Loader and a 1650 backhoe. I'm an old heavy equipment operator and I wanted something to work the new property I moved onto. I use the tractor quite regularly as the property was and still is in complete...
  5. Tractor & Equipment Maintenance
    Recently bought a 2004 JD5205 2WD and had it delivered. I’ve driven it a couple times and hydraulics on FEL and steering wheel was smooth. A couple days after getting it the hydraulics began to chatter significantly when lifting the FEL and box blade up and the steering wheel is now jerky...
  6. Implements & Attachments
    I have a weird thing happening with my front blade and it only happens when I take the blade out of float mode. The lever will be locked forward and the blade is in float and straight. Then when I pull back on the lever to raise the plow blade, the blade will angle fully right and then go down...
  7. Large Frame Compact Utility Tractors (LCUT)
    Tractor: 4066R Cab Hydrostatic 4WD with two rear remotes, 180H loader with the third SCV routed for front grapple attachment. I tried to use a rear remote for the first time on the tractor to a wood splitter. I wasn't having much success, and it was very slow. May have Bumped on or HIT both...
1-7 of 7 Results
Top