Green Tractor Talk banner

loader

  1. 455 vs x595

    Lawn & Garden Tractors
    Hi guys! I’m looking at a 5200$ 455 with 54 deck, a cab, front blade with quick hitch, rear PTO and 3PT and suspension seat with 81 hours on the clock from 1994 vs a 7900$ x595 from 05 with 48 deck with mulching kit, front weights, tougher tires, rear PTO and 3 textile bin collection system...
  2. Fair price for a 45 Loader?

    Implements & Attachments
    After months of searching, I finally found a used 45 loader that's ~3.5hrs from where I live. They're asking $3,300 USD. Is that a fair price?
  3. Can I move a 300cx loader and a 448 backhoe to a new 3039R tractor?

    Implements & Attachments
    Had a huge maple tree fall on my beloved 3520. At first it seemed like we dodged a bullet, but after freeing the tractor, it became apparent that the transmission housing cracked and they are telling me at the dealer that it is totaled. Turns out I had a limit on equipment replacement in my...
  4. 2018 3038e review

    Large Frame Compact Utility Tractors (LCUT)
    Hi everyone I just bought a new 3038e with a 300e loader. I’m writing this to see if anyone is having same problems and to get the attention of John Deere. I traded in a very good 950 for a brand new tractor with the promise of more horsepower and for reliability, but instead I got a tractor...
  5. A Fowl Move

    Sub Compact Utility Tractors (SCUT)
    I use my 1025r to pull post, remove a roof, clear an area, and ultimately see if it can lift and move our chicken coop without calling the bigger orange guy next door. 1025R: That Was A Fowl Move - YouTube
  6. JD H260 loader WEIGHT

    Implements & Attachments
    Hi all! I am using an H260 loader on my 5085M tractor and I'd like to know how much it weighs? It says 785kg (1730lb) on the side of the loader, but I'm not sure whether that is with or without the bucket? I can't find any info on the website. Thanks!
  7. 2032R Best Bucket Size Recommendations

    Implements & Attachments
    We're about to go green with a new Gen 2 2032R with 220R Loader and a 270B Backhoe. Any recommendations on best bucket sizes? Thanks! Dan :greentractorride:
  8. Problem with hydraulic hookups on 210 FEL

    Sub Compact Utility Tractors (SCUT)
    Anybody know what might be the cause of the hydraulic connection not seating into the female connection. Two of my four connections will not engage into the female hookups. The othe two work just fine in all of the female connectors. Just thes two will not completely engage in any of the females...
  9. Loaders by Westendorf

    Implements & Attachments
    For the 5 series JD. Loader comes with 3rd HYD option for a grapple. Total turn key ready for hookup. This is the CS-151 that is in the 420max family I believe. I have a quote for the CS-151. I won't publish the price but I will say it seems to be a legit deal. Doe anybody have an experience...
  10. 2025R Massive oil leak

    Sub Compact Utility Tractors (SCUT)
    :brokeheart::brokeheart: Bought Green Deer used in Nov 17. 60 hr on it and looked new, now with 190 hr it is ready for the salvage yard. The FEL will not raise more the 12" but lags the motor like oil is being put to both sides of cylinder at once. going down there is only gravity. Once down I...
  11. Wanted 970 pdf manual!

    Large Frame Compact Utility Tractors (LCUT)
    Anyone out there have a John Deere 970 operators manual or repair manual in a pdf for download. Just bought a used 970 and I’m pretty “green” when it comes to tractors. Any help would be greatly appreciated.
  12. For Sale: 2006 John Deere 5425 4WD 81HP Tractor, Model 542 Loader, Factory Cab

    Good Works Lawn & Power
    Howdy folks, Here is a gorgeous, one owner 2006 John Deere 5425 tractor with Model 542 self-leveling front end loader and factory cab. This tractor is on consignment on behalf of the owner. This tractor only has 330 hours on it and is four wheel drive. It's equipped with a John Deere Turbo...
  13. JD1450 with 100 Loader curl problem

    Implements & Attachments
    Hello all, A year ago I bought a 1985 JD 1450 (basically, a Yanmar) with a 100 Farm Loader. The bucket cylinders were leaking so I had them redone at my local shop. I've used the bucket just fine up until this past weekend when I was moving round bales with a spear. The spear was mounted to...
  14. New to the site!

    New Member Introductions
    My name is Nate, I've been involved in the offroad community for 15 years. Very little experience with tractors, but a lot of experience in metal fabrication. We've recently built some parts for a John Deere 770 / 70 series loader and were curious what other tractors it may fit! Had a lot of...
  15. Weight of the H165 Loader

    Implements & Attachments
    Greetings, For the life of me I can't locate the actual weight of a H165 Loader....maybe it just me ;) I see capacity but not actual weight in which I need to figure out towing capacity for my new acquisition. Best to ya! Thanks for the time!
  16. X739 extra SCVs

    Lawn & Garden Tractors
    So I just bought a used X739. I can already see times where I want the 3PH to be on separate hydraulic circuits from the front. For instance, when I get a snow plow for next winter with hydraulic up/down and left/right, I'm out of SCVs, but I'd also like to have a rear blade for back dragging at...
  17. D160 valve

    Large Frame Compact Utility Tractors (LCUT)
    I have a JD 3032E, I have installed the rear hydraulic remote Kit, went quite well. I want to ask if anybody knows what make the D160 loader valve is and is the rear remote the same make. I have looked all over for the manufacture of the valves and have found nothing. I wanting to install a...
  18. John Deere 1025r Tractor, Mower, Loader, with attachments

    For Sale
    Due to divorce, must sell my tractor. I bought it new in January of 2015 from Shearer Equipment. Has 61 hours on it now, will go up slightly for mowing. All accessories included. Runs great, operates as new, no problems or issues, hate to sell it but must go. Asking $14,900/offer. Located...
  19. Rubber/plastic mat for removing H120 front loader on finished garage floor?

    Implements & Attachments
    Hello All, I am new here, and recently joined the John Deere club. I purchased a 2016 1025R with the H120 Front Loader and 60" Drive Over Deck. I absolutely love this tractor, minus the weak seat springs (already ordered the upgraded springs from Ken's Bolt On Hooks). I found that attaching and...
  20. 400x loader, slack in masts @ end plates on a JD4720 Tractor

    Large Frame Compact Utility Tractors (LCUT)
    There is slack/looseness where the masts join on the end plates on tractor. It is from wear. Anyone have a solution. Have seen John Deere shim kits for other loaders, just not this loader.
Top