Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-13 of 13 Results
  1. Implements & Attachments
    Hello, Just got a used 44inch blower for my x354. Everytime i engage the PTO it makes this Awful grinding noise. Other older threads here describe a similar problem that stated it was the idler pully becoming faulty, but without any video or audio examples on those threads I cant verify if it...
  2. Implements & Attachments
    Hi guys! I've been de-rusting and putting back in shape my 2019 1025R with a 47'' snowblower. I have completely disassembled the blower, changed the impeller, changed the oil from both boxes (impeller gearbox and enclosed chain box), changed a bunch of screws, added a LOT of anti seize...
  3. Lawn & Garden Tractors
    The other day when I was mowing my lawn, I started noticing that my John Deere “slips” when it is in gear and the clutch is engaged. Weird, because it’s not a hydro. Anyway, as I was finishing up, I noticed there was a loud gear noise. Now the tractor is 30+ years old, so it’s noisy, but this...
  4. ZTR's and Commercial Turf Equipment
    So my Z425 will only start by jumping the starter solenoid. After that, it runs great. If you try starting it with the key switch, it cranks the motor, but makes a weird "Brrrr" noise as its spinning and won't ever start the engine. Its sending 12 volts to the solenoid like it should when you...
  5. Sub Compact Utility Tractors (SCUT)
    So today I was putting some trash in my loader to go burn and when I was backing up in my driveway I heard a loud pop, so I jumped off and looked around it almost sounded like I ran over something and broke it, but there wasn’t anything on the ground when I looked, so I started looking at the...
  6. Utility Tractors
    I’ve got a 5520 4x4 Cab, the parking pawl was broke when I bought it (it has the power shuttle). I have a noise in the rear axle, at first it was only at high speed and a clicking sound but lately the sound is not as loud and it’s at almost any speed now. I first thought it might have...
  7. Lawn & Garden Tractors
    Picked up a x738 (4x4 hydro) with 800hrs and after running it down the asphalt realized something is not quite right with the front right wheel. Theres a sort of clicking sound, will temporarily go away if turning the wheel and the wheel has a noticeable wobble. -Hydro oil is at normal level...
  8. Sub Compact Utility Tractors (SCUT)
    Newb question, but just taking delivery yesterday it was inevitable lol Is it normal to get some to get some disconcerting noises from the deck when mowing at less than full throttle? At ~2,000 rpm I’m getting an intermittent rattle as I roll along, turning into more of a vibration at ~2,500...
  9. Sub Compact Utility Tractors (SCUT)
    Hello all! I have been enjoying reading GTT for a while but this is my first post. I am hoping someone here will be able to help me refresh my memory. I have a 1025r with 18 hrs on it. Recently I have noticed that the SCV lever will strain when moved without the loader attached. Prior to the...
  10. Large Frame Compact Utility Tractors (LCUT)
    I just bought a brand new 4066r OOS and had the dealer install the 4th/5th SCV. I do not have a loader or 3rd SCV. When I lift my 3 point hitch with a heavy (+/- 1,000lb) arena drag on it, I am hearing a grinding noise from the 4th/5th SCV valve (by my right shoulder mounted on the ROPS) as the...
  11. Tractor & Equipment Maintenance
    Hello, when I shift from 4 to 3 or 2 to 1 in any range there is a loud bang noise, the same Happens when releasing the clutch in neutral or park, can anyone help, thanks Paul
  12. Lawn & Garden Tractors
    I noted a whining noise in the p/s and deck position hydraulics and saw that the reservoir cap had popped off thus allowing the hypo oil to leak out over time. I filled the tank which initially took are of the noise, but it comes back after restarting the tractor the next day. Goes away after...
  13. Sub Compact Utility Tractors (SCUT)
    Hello All, Does your 1026r seat make a popping noise when pressure is applied?? If so, it may be the plastic bracket inside the seat used to apply pressure to the seat switch. I removed the three Philips screws from the front of seat and removed the cushion to find the plastic bracket was...
1-13 of 13 Results
Top