Green Tractor Talk banner
rockshaft
1-10 of 10 Results
  1. Medium Frame Compact Utility Tractors (MCUT)
    On my JD 2320, when I have the ballast box on and anywhere off the floor, the hydraulics keeps cycling as though the 3pt hitch is slowly going down and the rockshaft wants to keep it up where I set it. I took the back plate off a while ago and didn't see any obvious leaking around the piston...
  2. Large Frame Compact Utility Tractors (LCUT)
    Hi! An extremely frustrating problem arose today. I was mowing with my 3pt brush mower and at some point realized the hitch was no longer lifting. I was only out mowing for about 15 mins when I noticed it. No upwards motion at all, but it moves freely when I lift it by hand. I can't hear any...
  3. Medium Frame Compact Utility Tractors (MCUT)
    Since purchasing my 2023R new in March I've been unable to get the rate of drop knob to turn...at all. I called the dealer and they asked me to bring it in but I don't have access to a trailer to haul it in at this time. I've tried the simple things like spraying some WD40 on it to pulling the...
  4. Large Frame Compact Utility Tractors (LCUT)
    I am trying to replace a rockshaft control lift arm pin (part number M136549). I thought that this would be simple but after removing the pin nut I cannot get the pin out of the arm. I don't want to beat on it to much and break something else but there has to be a simple way to get the pin...
  5. Lawn & Garden Tractors
    I upgraded from my 2010 X500 to a new X738. I had a 48" plow with the hitch, rockshaft, and manual angling kit ready to go. They guy who bought it was going to make it work on a Honda 4x4 of some kind, and he bought it without all the good stuff I worked hard to keep for someone. I'm selling...
  6. Hydraulics
    Hi guys, I'm new to this forum, so if I make some mistakes, please understand me. So I have a hydraulic problem with this old JD. Everything worked fine until a week ago, when oil started coming out from the gear lever area and I saw smoke coming from the hydraulic pump in the front. The result...
  7. Lawn & Garden Tractors
    Does anyone has a parts diagram for the rockshaft & cylinder assembly on a x758? My deck would not raise fully, so I removed the deck and got under the tractor. One of the bushings and retaining clips were missing from the cylinder rod end/rockshaft connection. I'll be replacing those items...
  8. Sub Compact Utility Tractors (SCUT)
    Sorry if this already discussed, its my first time posting and I couldn't see anything about this specifically. I saw that this is an issue that a lot of 1023/1025/1026 have had issues with the rockshaft snap ring coming off. I was plowing snow with my 1023e, which has 25 hours on it, and the...
  9. Medium Frame Compact Utility Tractors (MCUT)
    Hi All! Please help with the following … Background: Yesterday the 3 point was operating normally except for somewhat limited lift height because of a bent (twisted) bracket (Item B, page 60-35-2 of JD2520 Technical Manual). This bracket attaches the depth control handle to the rockshaft...
  10. Sub Compact Utility Tractors (SCUT)
    Has anyone here done a rockshaft replacement on a 2210 before? Mine broke on the right side where the lift arms attach. What kind of problems am I in for? Is there anything particular I should be prepared for? Thanks for your time, Donovan
1-10 of 10 Results
Top