Green Tractor Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 41 Results
  1. Sub Compact Utility Tractors (SCUT)
    Quick question. Ive been searching and can't find the answer. My 1025r has the Quick connect MMM. I am trying to install a 47" front mount snowblower. The driveshaft that came with it looks like it's meant to connect directly to the transfer case. Do I need to remove the quick mount pieces...
  2. Implements & Attachments
    but I think it's clear now that I purchased it and brought it home, that there is no way this fits my tractor. I purchased an M044SBH010623 snow blower I have a John Deere E150 If I have to turn around and sell this thing, I just need to know, for certain, what tractors the Snowblower fits...
  3. Lawn & Garden Tractors
    This has 400 hrs. on it, and has been serviced with auger bearings replaced. The seller is asking $1300. Is this a good model? Is this a good deal? What should I look for? Thanks
  4. Implements & Attachments
    Hey folks, trying to check the oil on both the auger gearbox as well as the gearbox in back and ran into challenges with both. Hopefully I'm missing something! For the auger gearbox, I don't have what the manual calls a check plug on the side of the gearbox. I only have the vent plug on...
  5. Lawn & Garden Tractors
    Hello. Looking for any suggestions as to why my 23 year old LT166 might be slowly losing reverse power/strength after she's used for snowblowing up here in MN for more than 20 min. Why would it start out having full reverse function and then fade away as engine warms up? I've just had the...
  6. Implements & Attachments
    Hi all! I'm doing the yearly maintenance and prepping for winter and I am trying to find at the same time why I'm breaking 10-15 shear pins yearly. While looking at the diagram, I see that there is a bushing required between the impeller and the enclosed gear (chain) box. See #24 below. I...
  7. Wanted to Buy
    Hello all, I'm new to the forum and recently purchased a used JD 4410. After getting +400" of snow last year, with heavy wind and hard drifts, my rzr with a snow plow was really not cutting it... cue the tractor. The 4410 has a front pto already, but I need the snow blower now. It is the first...
  8. Hydraulics
    I am considering a rear mounted 3PH snowblower for a Deere 2038R tractor. For my own use as I am not a snow contractor. I do not have extra hydraulics in the rear of the tractor, but I have a quick disconnect front-end loader 220R which when removed would leave me some unused hydraulics on the...
  9. Implements & Attachments
    I have a 59'' blower on a 2032r. The blower and tractor are just a couple years old. When I was blowing today I started pushing rather than blowing snow and figured I busted a shear bolt. To my surprise I find that the shear bolt was in tact, while the entire plate/arm that the shear bolt...
  10. Implements & Attachments
    I ordered a new 2023 John Deere 2025R and while waiting for it to arrive I found a used 2021 SB1154 Snowblower that was in fantastic shape (basically used once and that’s it). I’m trying to make sure that the PTO shaft is going to work. It is 33 inches long with it attached from the base of the...
  11. Lawn & Garden Tractors
    I have a ‘94 JD 445 my wife and I inherited a few years ago. We have decided to use the snowblower for the first time but seem to be missing a part. I can’t seem to locate the coupling that connects the shaft on the snowblower side to the main shaft running under the tractor. Does anyone know...
  12. Implements & Attachments
    Snowblower is 7 years old. We had a gully washer of a rain storm back in August, tore up places on our 7/8 mile long gravel driveway. Normally we get a few inches of snow at a time and hardly ever at the beginning of November so road repair was on my short list at the end of October. This year...
  13. Implements & Attachments
    I have a 2016 model 1025R that I was happily using a front mount mid-PTO driven snowblower with last winter. This year I got the 60D mid mount mower with auto connect fitted by the dealer. Went to put the snowblower on yesterday and of course the PTO is hooked up to the mower mount. Do I have to...
  14. Medium Frame Compact Utility Tractors (MCUT)
    Hello all, This is my first post to the forum. I recently bought a really clean 4110 with only 140 hours on it. It is the hydro model. The only attachments it came with were the 410 loader with a bucket and the ballast box for the rear 3 point. I live in central Wisconsin and before long the...
  15. Lawn & Garden Tractors
    Hey guys! I’m new to the whole lawnmower game, I just got a 1999 GT235 mower and I’m having a difficult time finding a snowblower that’s compatible with it. I’m seeing something about a 48c; is that the style of deck? Any help with finding the correct snowblower would be helpful! Thanks
  16. Implements & Attachments
    I’m in the early stage of getting my new 3046R and John Deere Heavy Duty 60“ snowblower dialed in for the winter. @Kennyd asked that I start a thread so it is separate from a thread on the 59”. @Superglidesport said that his recent sighting of the 60” unit looked like a 59” with green paint...
  17. Vintage Lawn & Garden Tractors
    Hello I have a new to me model 49 snowblower on a 317. I installed the snowblower for the first time and when I raise the blower the left side doesn’t raise to the same height as the right. Long story short, the blower sits on an angle when in the raised position. Is this normal for these...
  18. Sub Compact Utility Tractors (SCUT)
    Hey team, I’m looking for a used front mount snowblower for my 1025r. Came across a listing for this blower. It was used on a 1023... I’m assuming it will fit but I want to be sure, obviously, before I entertain a purchase. It’s listed for $3,000. Does this seem like the going rate for this...
  19. Lawn & Garden Tractors
    Hello experts, need some help. Trying to connect my 47” snowblower to my x728 tractor. Was able to get 3 of the 4 hydraulic connections on but the 4th has too much pressure. Is there a relief valve or tool or some other trick I can use? Thanks much in advance!
  20. Implements & Attachments
    I’m looking to get a PTO snowblower for my 1025R. I already have a HLA snow push on the front, and I figure with a blower on the back, I’ll be ready for anything old man winter can throw at me. I’ve gotten two quotes so far, one for a MK Martin Meteor SB48 ($3,120) and one for a Frontier SB1148...
1-20 of 41 Results
Top