With each passing year, it gets harder to get on the ground. :) Wondering if it is possible to retrofit a 2011 X748 to use a new 54HC deck with auto-connect or is this only possible/sanctioned for 2013+ Signature Series?
If it matters/interferes - I do have a 45 loader.
Thanks in advance...
I took the fuel sending unit out to clean the tank. It's diesel and there was a little bit of algae in the bottom that I found after draining it. Put new fuel in. Now the Engine won't start.
The instrument cluster lights up but the engine won't do anything when...
I'm having trouble getting a level cut even after I level the deck. I measure the blade tips left to right and front to back, leaving then 1/4" lower in the front.
The problem is that if I'm on a hill, mowing left to right across the hill, one side of my deck cuts noticeably lower...
Can anyone shed some light on which tillers are compatible with the x700 series?
Personally, I have an x740 with rear pto and 3ph. I'm looking for JD attachments or any other brand. I'd like to compare and am having a hard time finding results I can be confident in.
Thanks to all!
My 2010 X748 is currently dead. Battery/plugs/fuses all checked. We've finally tracked it down to fuel not getting into the injectors. There is fuel to the pump, it's just not coming out of the pump into the injectors.
Once detached and checked, the fuel cut off solenoid is...
I've inherited a 2010 JD X748 with rear disposal mower deck.
The belt is very slack and mostly slips when cutting any grass over 2". Is there any way to adjust the belt tensioner, or should I look at getting a new belt?
I've Googled for ages to find the exact deck I've got (it's...
New to the forum and hoping some veterans can help a newbie out.
2010 x748SE 550 Hours
Reugg 3pt Hitch
Hydraulic fluid and Filter changed in November and has seen about 25 hours of use since. The transaxle is not shimmed as far as I know. AUX hydraulic pressure is...
I am doing my research before making the big plunge on either an x748 or 1026r. At first glance, I wanted the 1026r. My dealer let me take a test ride and I fell in love with it until I started across a long and narrow strip of yard where I would have to mow sideways across a slope...