Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter #1
Picked this 60” system up before I took delivery of my new 1025r. Ended up with the front-end loader and backhoe. What I didn’t realize was although the Powerflow system has a quick detach setup, a small stub is left mounted to the frame that obstructs the installation of the backhoe. Just getting too old to be bolting things on and off. Knees are shot. My short sightedness is your gain.

This system on the 1025r uses a very long chute. The chute has markings to be cut down for installation on many different models. This unit has 3 bags under a hinge up cover. It is powered off the right side deck pulley. Installation and removal only takes a few minutes so it can be used seasonally.

These systems are $2,200.00 + new from John Deere. Asking $1,100.00 cash sale.
Only trade I would consider: JD front broom with quick hitch for the 1025r or the Frontier plow for the H120 loader. Cash + or -

Running sale here for a few days before it hits Craig's List.


50 miles North of Milwaukee.

Send PM with contact info.

Thanks!

20180525_083511.jpg
 

·
Registered
Joined
·
1,932 Posts
What part obstructs the backhoe installation? One piece bolts to the hitch plate and it uses the top link from the 3pt. Unless Deere has changed things since I bought mine in 2014.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
212 Posts
Discussion Starter #3
What part obstructs the backhoe installation? One piece bolts to the hitch plate and it uses the top link from the 3pt. Unless Deere has changed things since I bought mine in 2014.


Sent from my iPhone using Tapatalk
That's the piece I am talking about.

Needs to be unbolted from the hitch plate to put the backhoe on.
 

·
Registered
Joined
·
7 Posts
If you want to keep the material collection system, a solution is to get the Jamison Bryce LLC, iMatch adapter and cart. I got mine from Mutton Power, but they do not list it on their site any more. Can still order from Jamison Bryce LLC for $640 plus shipping. This solution gets rid of the angled bracket that attaches to the hitch plate, and allows a simple iMatch connection. No more having to struggle with removing the bagger hood and angled bracket. The cart also has bracket to hold the power flow unit when it is not attached to the mowing deck. One warning is, you will require an uncut chute. The iMatch adapter requires a 4inch longer chute then one cut down to fit the standard 1025r configuration. Also Jamison Bryce recommends an independent lift system for the deck. I love mine. :bigthumb:
 

·
Registered
Joined
·
1,932 Posts
If you want to keep the material collection system, a solution is to get the Jamison Bryce LLC, iMatch adapter and cart. I got mine from Mutton Power, but they do not list it on their site any more. Can still order from Jamison Bryce LLC for $640 plus shipping. This solution gets rid of the angled bracket that attaches to the hitch plate, and allows a simple iMatch connection. No more having to struggle with removing the bagger hood and angled bracket. The cart also has bracket to hold the power flow unit when it is not attached to the mowing deck. One warning is, you will require an uncut chute. The iMatch adapter requires a 4inch longer chute then one cut down to fit the standard 1025r configuration. Also Jamison Bryce recommends an independent lift system for the deck. I love mine. :bigthumb:
I have the Jameson Bryce setup. Makes the bagger so much easier to use.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
212 Posts
Discussion Starter #6
MCS is SOLD Please remove.

Thanks for all the help.
 
1 - 6 of 6 Posts
Top