Green Tractor Talk banner
1 - 2 of 2 Posts

·
Super Moderator
Joined
·
4,113 Posts
Mark, this is the lever of the discussion. It's got a square key and retrained by a snap ring, as mentioned. I believe it's like that to allow installation/removal of the lift shaft that transverses side to side?

I first noticed mine a couple years ago, that the lift levers that the eyebolts ride on weren't at the same height off the floor. 10 minutes of investigation, I said screw it, wasn't worth tearing apart to find out there's nothing to be done, outside of cutting and welding. I set the mower at the desired cut height and leveled the deck. The turnbuckles are at different lengths, but it doesn't effect anything.

Motor vehicle Hood Automotive tire Automotive exterior Tire
 
  • Like
Reactions: MarkEagleUSA

·
Super Moderator
Joined
·
4,113 Posts
What year is your tractor?
Mine looks different,same concept however
14.

That's weird. The 2014 & 2019 use the same part. Matter of fact, it's the same from 2011 through early 2020. Then they changed the entire deck lift system for mid-2020 and up.
 
1 - 2 of 2 Posts
Top