Green Tractor Talk banner

1025R mower deck isn’t lifting?

985 Views 4 Replies 3 Participants Last post by  Peter detwiler
I just bought a 1025R and am not able to raise the mower deck. I’m sure it’s just something simple I’m not seeing. Any thoughts?
1 - 3 of 3 Posts
Where is dial set, it might be locked, do you have a backhoe or a power beyond kit, those have to be plugged in to complete circuit for you hydraulics to work.

Which lift setup do you have, the one off the 3pt or the separate one off your hydraulics?
Where is dial set, it might be locked, do you have a backhoe or a power beyond kit, those have to be plugged in to complete circuit for you hydraulics to work.

Which lift setup do you have, the one off the 3pt or the separate one off your hydraulics?
The dile is on the unlocked position. The hydraulic line in the back is plugged in. I have the 3pt.
Thanks guys! It was the rear hydraulics, a simple disconnect and reconnect.
Try un-plugging and re-connecting the power beyond lines again. Sometimes they look connected and really are not. New connecters can be stiff. It's happened to me several times. The symptom is the deck won't raise. Where the deck height dial is set should not matter. That only determines where the deck will stop at when it lowers. That should not matter when raising the deck. Just for future reference, the 1025R is a SCUT.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top