1026R backhoe drops overnight

5336 Views 9 Replies 7 Participants Last post by robpm, Apr 26, 2012

mrbrown

Discussion Starter · Apr 22, 2012 (Edited)

Noticed my backhoe dropped overnight. It's not touching the ground but it did drop enough to notice. Is this normal? I'm new to the hydraulic world. Maybe I should use the pins or let the backhoe rest on the ground when not in use. Should make it harder to steal if someone wants to try and dodge some bullets. After reading some other posts on here and in some other areas it looks like this is normal. Thanks

Save

1 - 1 of 10 Posts

Scotty370

· #9 · Apr 23, 2012

My 4200 has the two pins (Main Mast and Swing) that I always replace from their storage holes in the footplate of the BH Operators Station. I've never had an issue with the stabilizers going down......... ~S

Save

1 - 1 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.