Green Tractor Talk banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello everyone, New member here needing some help or advice. I replaced some seals on the front axle assembly on the left front of my 1050 four wheel drive tractor. Both of the front wheels lock up when going forward but move ok when going in reverse. Also, when the front end is lifted up the wheel will turn forward and the other side spins in reverse easily. I have no idea what happened as I paid, what I thought was, pretty good attention to how I took it apart but something is wrong. Hopefully someone has some experience to this happening. Thank you in advance for any help or suggestions!
 

·
Registered
Joined
·
1,339 Posts
someone might hopefully have access to a diagram of the axle assembly?

My dad replaced some seals in the front axle of my 1050, but we didn't run into the same issue. if it just started after you put it back together, I'd take it apart again and look for something that's binding up.
 
  • Like
Reactions: John R
1 - 2 of 2 Posts
Top