Green Tractor Talk banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Just bought a 110 TLB. 2003, 400 hours. Super super clean machine. 4 in 1 bucket, aux on backhoe, just well kept machine.

Only problem is remotes on back won't switch on. In fact, the indicator that shows "front or rear" doesn't even light up at all. The front 3rd function works perfect, press on, and the joystick buttons work fine. "A/B" continuous switch works fine. The middle front button doesn't disable the loader, (enabling the rear remotes), nor does it make either light come on. I understand the "front light" should be on anytime after pushing the "on" button.

Any ideas where to start? Fuse for "aux hyd" is good. That's all the farther i've went.
 

·
Administrator
Joined
·
17,135 Posts
Welcome to GTT,
Since the light does not light you need to start checking for power, the spools are known to stick form lack of use and/or moisture in the fluid but when that happens I believe the light still comes on.

I believe this is the correct online owners manual for your machine: OMLVU19603_A9

Part #63 is the solenoid that switches the diverter:
MP63603________UN06NOV06.jpg
 
1 - 2 of 2 Posts
Top