Green Tractor Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
i have a 63 4010 with a 48 jd loader, when i turn on the hydraulics to run my loader my pump is under a load even without operating loader is this normal? also when i have my 3 pt down it make a lot of noise and i loose pressure to my loader what could be a cause?
 

·
Registered
Joined
·
1,244 Posts
Believe the filter should be on the left side if you are facing the same direction as the tractor. And should be ahead of the rear wheel.
 

·
Registered
Joined
·
1,406 Posts
where is the filter and screen for the hydraulics located
Have you tried going to the JD parts web site to see what the parts layout looks like? That may give you a good idea where to find that information. You can find it here John Deere - Parts Catalog

Or if that does not work go here and select "View Parts Catalog" and then when you get to the next screen just enter the model # John Deere Parts It looks like they may have a complete PDF of it you can save as well.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top