Green Tractor Talk banner

2000 jd 4200

531 Views 1 Reply 2 Participants Last post by  Tx Jim
Hello everyone my name is Devin I knew to owning a tractor I purchased a 2000 John Deere 4200. I was down back one day retrieving firewood and I broke the filter housing off the bottom of the tractor I called my local dealer and I purchased all the correct necessary parts to replace The tractor is now running correctly but I noticed that the hydraulics on the loader seemed to be slower than normal and when I get rpm it seems to be correct lifting capacity also seems to be a little restricted is there something missing or a certain test I can check to find out what's going on I don't have a hydro gage at the moment in the process of getting on. I didn't know if there was anything else I could check
1 - 2 of 2 Posts
How long since filter screen(key 4) has been checked/cleaned?

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top