Green Tractor Talk banner

2020 Autoconnect MMM removal - can't release the latches

2186 Views 10 Replies 8 Participants Last post by  sansbury
Brand new 1025R owner here with my first problem :ROFLMAO:

54D autoconnect deck - the whole process makes sense but I can't turn the retainer latches--the ones shaped like a wine bottle. I've raised the gage wheels, dropped the deck, and when I go to turn the latches, they are seated too firmly against the round rod to turn. I've tried moving the tractor around a bit and inching it slightly forward and back, but no joy so far. Are there any other tricks to free things up that I haven't learned yet?
1 - 1 of 1 Posts
If you are doing it correctly and it won’t come off you can lengthen the front draft arm to give a little slack. It the long silver u shaped bracket at the front of the deck.
  • Like
Reactions: trav and Herminator
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top