So far this is a 3 bourbon job. Not too bad but the instructions suck
![Hood Automotive tire Motor vehicle Bumper Automotive exterior]()
![Vehicle Tire Motor vehicle Automotive tire Wheel]()
2025 3rd function
Well my new 2025 tlb was delivered Wednesday and since this weekend is going to be a washout I thought I would install the JD 3 rd function .
Any words of wisdom from anyone who tackled this job?
Any words of wisdom from anyone who tackled this job?
1 - 15 of 15 Posts
Are you installing the power beyond?
It was already installed since it’s a TLB
Install went really well but instructions absolutely are terrible. It took me about 9 hrs totally back together. Knowing what I know now I could cut that down by at least 2 hrs. I will say it is a very nice kit and very factory looking. Other than the the new joystick handle you would never know it was on the tractor
What part numbers did you use to complete this? Looking to add to my 2025R. thanks
I asked to have both the 3rd fx and power beyond installed on my not yet delivered 2025R and was told it could not be done. Mine has a cab which may be the difference, but what do I know
Deere's position is likely that the backhoe can't be had on a cabbed tractor so there's no need for Power Beyond. However I don't see why they can't coexist like on the open station machines. Then there's the fact that the cab needs to be removed for installation.I asked to have both the 3rd fx and power beyond installed on my not yet delivered 2025R and was told it could not be done. Mine has a cab which may be the difference, but what do I know
It would already be removed for the 3rd function install so labor wise its just adding 1 extra pipe while they are already there.Deere's position is likely that the backhoe can't be had on a cabbed tractor so there's no need for Power Beyond. However I don't see why they can't coexist like on the open station machines. Then there's the fact that the cab needs to be removed for installation.
No place to mount it on the cabbed tractor. At least not officially.It would already be removed for the 3rd function install so labor wise its just adding 1 extra pipe while they are already there.
No place to mount what?No place to mount it on the cabbed tractor. At least not officially.
The third function or the power beyond?
BLV11156 and if yo have the power beyond installed already you will need another pipe. I do not have that part number.What part numbers did you use to complete this? Looking to add to my 2025R. thanks
If you need the power beyond kit this pipe is included
So my dealer is telling me I need (BLV10731)BLV11156 and if yo have the power beyond installed already you will need another pipe. I do not have that part number.
If you need the power beyond kit this pipe is included
Cost of parts plus nine hours of my time,I think I came out ahead with a factory install part at $884
divided by sixty payments too
Everyone is different
divided by sixty payments too
Everyone is different
1 - 15 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Green Tractor Talk
A forum community dedicated to John Deere tractor owners and enthusiasts. Come join the discussion about towing, PTO’s, reviews, attachments, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
Join now to ask and comment!
