Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Just joined because having issues with me 2025r. 3 point won’t drop at all. Read all posts regarding the ROD knob and that is not the issue. All connections seem loose and no binding of draft arms. Is there a way to tell if it’s the rock shaft valve or the rate of drop valves?
 

·
Premium Member
Joined
·
2,146 Posts
Welcome to GTT from south central PA.

I assume you have the "rate of drop" valve open, correct?

You indicate you have the draft (lift) arms attached. Can you manually push the 3 point down by applying weight to it?

Did the 3 point control lever attaching bolt come loose so that when moving the lever, it isn't actually moving the control valve?
 

·
Registered
Joined
·
3 Posts
Look behind the right wheel where the lever attaches to the control valve. There should be two m8 bolts with 10mm heads attaching that lever to the valve. Mine was doing the same and one of them had come loose at one time and fell out.
 
1 - 3 of 3 Posts
Top