Green Tractor Talk banner

1 - 6 of 6 Posts

·
Super Moderator
Joined
·
5,112 Posts
Hmmm... Good question. You're the first I've seen ask about this.

The 1st generation 2025R used the same 200CX/H130 loaders as the 2032R used. But the new 2025R uses the same 120R loader that the 1023E/1025R uses.

So I'd have to guess that the new 2025R might be able to use the same H120 loader that the 1023E/1025R used before the 120R loader was introduced. The question there is if the mounting supports are the same on the 120R as they were for the H120. I don't know the answer to that one but maybe someone will chime in with that!
 

·
Premium Member
Joined
·
12,278 Posts
Will a front end loader from 2013-2016 fit a 2019?
The problem is that while the manuals for the newer loaders will usually list previous tractor models that the loader will fit, they never go back and revise the manuals for the older loaders to show which if any newer model tractors they fit.

So since the Gen-2 2025R didn't exist when any of the 2013-2016 loaders manuals were written, they will not have any mention of it.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4
Thank you. I was looking to buy a new 2025r and found a loader for sale from a 2016 model. I was just curious if anyone has tried it.
 

·
Administrator
Joined
·
18,001 Posts
Thank you. I was looking to buy a new 2025r and found a loader for sale from a 2016 model. I was just curious if anyone has tried it.

The mounts would surly be different, so in the end you'd probably not save much.
 

·
Super Moderator
Joined
·
5,112 Posts
I was intrigued so I went digging in JDParts.

The H120 and the new 120R loaders use the same mounts and frames for the 1-series tractors.

There is no mount setup for the H120 listed for the 2025R. (not surprising!)

The 120R mounts for the 1-series machines and the 2025R are the same part. But the frames (the parts that connects the mounts to the loader masts) is different for them.

Soooo... I *think* if you found a good deal on a H120 loader, you could spend $500 and buy the 2025R frames for a 120R loader and make it work. You'd be looking at ~$500 for those frames.
 
1 - 6 of 6 Posts
Top