Green Tractor Talk banner

1 - 20 of 20 Posts

·
Premium Member
Joined
·
423 Posts
Discussion Starter #1
Hello All,
I recently put together a top link for my 2032r.
Cost was well under 200.00.
 

Attachments

·
Registered
Joined
·
1,583 Posts
Nice! I did the same. Bought cylinder and had hoses made. 210$ I think.
 

·
Premium Member
Joined
·
2,725 Posts
What cylinder did you use.. Thanks
 

·
Premium Member
Joined
·
423 Posts
Discussion Starter #4
What cylinder did you use.. Thanks
Agri-supply has a 2" x 8" cat 1 for 99.00. #90599
I also bought 2 - 90 degree 3/4-16 orb to 3/8 npt fittings to go from cylinder fittings to hoses. #18652 10.00
Next I got 2 - 3/8 x 36" hoses at Mills Fleet Farm for 7.00 each. Agri supply has these also for about 14.00 #86654
You need 2 - male 1/2" ag couplers to hook into tractor scv's. #86641 5.00 Agri supply.
Lastly 2 - adapters for hose to ag couplers. #104181 5.50 Agri supply
If I did this again I might try 30" hoses, I think they would be long enough?
Hope this helps!
 

·
Registered
Joined
·
1,583 Posts
Agri-supply has a 2" x 8" cat 1 for 99.00. #90599
I also bought 2 - 90 degree 3/4-16 orb to 3/8 npt fittings to go from cylinder fittings to hoses. #18652 10.00
Next I got 2 - 3/8 x 36" hoses at Mills Fleet Farm for 7.00 each. Agri supply has these also for about 14.00 #86654
You need 2 - male 1/2" ag couplers to hook into tractor scv's. #86641 5.00 Agri supply.
Lastly 2 - adapters for hose to ag couplers. #104181 5.50 Agri supply
If I did this again I might try 30" hoses, I think they would be long enough?
Hope this helps!

Any reason you chose the continuous flow ports to plug into. I connected my top link to the upper ports that have the float feature. Nice for bush cutting on uneven terrain. Allows the top link to track in and out when going over a quick hill.
 

·
Premium Member
Joined
·
423 Posts
Discussion Starter #6
Any reason you chose the continuous flow ports to plug into. I connected my top link to the upper ports that have the float feature. Nice for bush cutting on uneven terrain. Allows the top link to track in and out when going over a quick hill.
Haven't used it enuf yet to know any better. I plugged my hydraulic snowblower chute to the top one's for convenience.
 

·
Fit Rite Hydraulics
Joined
·
639 Posts
I'm curious, don't you guys have any clearance issues with the hitch fully raised? :unknown:
 

·
Premium Member
Joined
·
423 Posts
Discussion Starter #8
I'm curious, don't you guys have any clearance issues with the hitch fully raised? :unknown:
I ran it up and down with no clearance issues throughout the range. Hooked up the snowblower and used it without issue, I think it's good to go.
I wish my hose loops where a little tighter for asthetics, but works great. To be honest I don't raise it to the top anyway, too much angle on PTO shaft joints.
 

·
Registered
Joined
·
11 Posts
Agri-supply has a 2" x 8" cat 1 for 99.00. #90599
I also bought 2 - 90 degree 3/4-16 orb to 3/8 npt fittings to go from cylinder fittings to hoses. #18652 10.00
Next I got 2 - 3/8 x 36" hoses at Mills Fleet Farm for 7.00 each. Agri supply has these also for about 14.00 #86654
You need 2 - male 1/2" ag couplers to hook into tractor scv's. #86641 5.00 Agri supply.
Lastly 2 - adapters for hose to ag couplers. #104181 5.50 Agri supply
If I did this again I might try 30" hoses, I think they would be long enough?
Hope this helps!
Thanks a bunch i just did the same thing. Up here in Canada just under 300$, yeah i know stuff is more expensive.

This was really easy and works like a charm, so much so that I really want to set up a side link as well has any one found a side like cylinder that can be installed as is? On newer 2032r & 2038R the side link seems fairly straigh forwrad no odd angle.
 

·
Premium Member
Joined
·
423 Posts
Discussion Starter #10
Thanks a bunch i just did the same thing. Up here in Canada just under 300$, yeah i know stuff is more expensive.

This was really easy and works like a charm, so much so that I really want to set up a side link as well has any one found a side like cylinder that can be installed as is? On newer 2032r & 2038R the side link seems fairly straigh forwrad no odd angle.
Just search online for side link cylinder cat 1. If I get a chance I'll look up the one I plan on using when time and money allow.
 

·
Premium Member
Joined
·
423 Posts
Discussion Starter #11
Thanks a bunch i just did the same thing. Up here in Canada just under 300$, yeah i know stuff is more expensive.

This was really easy and works like a charm, so much so that I really want to set up a side link as well has any one found a side like cylinder that can be installed as is? On newer 2032r & 2038R the side link seems fairly straigh forwrad no odd angle.
Go to Tractor Joe .com and look up slh03. Currently 257.00
 

·
Registered
Joined
·
112 Posts
Agri-supply has a 2" x 8" cat 1 for 99.00. #90599
I also bought 2 - 90 degree 3/4-16 orb to 3/8 npt fittings to go from cylinder fittings to hoses. #18652 10.00
Next I got 2 - 3/8 x 36" hoses at Mills Fleet Farm for 7.00 each. Agri supply has these also for about 14.00 #86654
You need 2 - male 1/2" ag couplers to hook into tractor scv's. #86641 5.00 Agri supply.
Lastly 2 - adapters for hose to ag couplers. #104181 5.50 Agri supply
If I did this again I might try 30" hoses, I think they would be long enough?
Hope this helps!
Has anyone tried this with the 30" hoses?
 

·
Registered
Joined
·
1,973 Posts
What hydraulic ports/controls do you guys have in your machines that you are using to run this hydro top link?
 

·
Registered
Joined
·
11 Posts
My 2032r has optional dual rear scv.

36" hoses are a bit long but it still works great.didnt want to risk 24" being too short.


Sent from my ONE E1005 using Tapatalk
 

·
Registered
Joined
·
1,583 Posts

·
Registered
Joined
·
112 Posts
Go to Tractor Joe .com and look up slh03. Currently 257.00
So just to updates this. The one you need is A-SLH101, the A-SLH103 is too big, Their website is not very good with specs. The 101 is perfect, except the bottom link is wider than the stock, so the pin is a little short. I was able to remove the washer, and get the hitch pin in.

20180807_143156.jpg
 
1 - 20 of 20 Posts
Top