[HomesteadJoe]

Cogsy75, Can you order Mauser cab kits for the 2036R? We are unable to get the 2 series cabs here in the USA. I've contacted other dealers in the UK and was told the cabs are only available on new factory-built 2036Rs and dealers cannot obtain cab kits. Can you verify? We could fill a container with those and sell them here in the USA... Many Thanks
Sincerely

 

[PJR832]

Poor 3038E is now 2" lower than standard
They both sat the same height before the swap, now the 2036R towers over it!!

It does, at first glance it looks like a SCUT sitting next to it.

 

[mike01]

that's the last of the 2036R, we are transitioning to the 2038R with stage V engine with DPF. I didn't want the DPF.

Wait...the 2036R had the turbo without the DPF!?!? You are one lucky #%%@# that you got in on that before it went poof.

Tires look great btw.

 

[414concrete]

I’m doing it.

I found a set of new 15x19.5 tires and wheels for $250each! How could I resist? Also bought a new pair of 25x8.5-14 for $200 which I will mount on my current wheels. New would have been $1,731.40 just for the rears!

I’ll post pictures and details how my loader, backhoe, and autoconnect work afterward.

 

[Herminator]

I suspect the auto connect will still work. It drops further than needed.

When you raise the tractor it changes the geometry of the auto connect slightly so you might have to adjust the front arms to be longer. My deck is set to take on and off with the turf tires but if I do it with my ag tires I need to block the deck up the 1” that the tires raise it to get the rear latches to close.

 

[414concrete]

I suspect the auto connect will still work. It drops further than needed.

When you raise the tractor it changes the geometry of the auto connect slightly so you might have to adjust the front arms to be longer. My deck is set to take on and off with the turf tires but if I do it with my ag tires I need to block the deck up the 1” that the tires raise it to get the rear latches to close.

Good to know, thanks!

 

[Big]

I’m doing it.

I found a set of new 15x19.5 tires and wheels for $250each! How could I resist? Also bought a new pair of 25x8.5-14 for $200 which I will mount on my current wheels. New would have been $1,731.40 just for the rears!

I’ll post pictures and details how my loader, backhoe, and autoconnect work afterward.

I can't wait to see it!

 

[414concrete]

Wait, which forum will I post in!? MCUT or LCUT?

“Hybrid”

Joking aside, this tire/wheel combo should be an option available now. The orange brand LX is the direct competition to the 2r’s and they get the option.

 

[414concrete]

Got the fronts mounted, everything looks good. The rears show up later this week and I’ll get some good pics next weekend once everything is done.

 

[414concrete]

 

[414concrete]

Everything is good except the clearance of the anti-scalp wheel on the left side. Clears ok but I won’t leave it like this, I’ll need to modify it.

 

[Big]

I guess it was ok to drive over your deck? Looks like not only a clearance issue with the scalp wheel but it also looks like you have to drive over it. Very cool btw.. looks awesome

 

[414concrete]

Ya no problem connecting or disconnecting the deck, just really really close to the anti-scalp. Which is ok because we’re getting 8” of snow today and I’ve got to put the deck away until spring. No backhoe or loader issue either. Outriggers clear up and down no problem.

I never would have done this if I didn’t get a sick deal on the rears. Brand new take offs from Anderson Tractor in Ohio. Salvage yard. Tires still have nubs from factory. Makes me wonder what happened to the donor tractor😂

 

[Cogsy75]

Ya no problem connecting or disconnecting the deck, just really really close to the anti-scalp. Which is ok because we’re getting 8” of snow today and I’ve got to put the deck away until spring. No backhoe or loader issue either. Outriggers clear up and down no problem.

I never would have done this if I didn’t get a sick deal on the rears. Brand new take offs from Anderson Tractor in Ohio. Salvage yard. Tires still have nubs from factory. Makes me wonder what happened to the donor tractor😂

Good job. Ive done the same swap, I have fitted my 270B but I’m still waiting for my 72D & 220R MSL to arrive. I have also ordered front mud gaurds, hopefully they fit.
I’ll let you know how I go once I get these.

 

[414concrete]

Cogsy75, I haven’t disconnected the backhoe yet, I need it for weight while snow plowing. Have you and did you have any issues?

 

[Herminator]

That looks great. Thanks for starting a thread and keeping us up to date.

 

[PJR832]

Funny, I was just looking at R1's in a larger size last night, the 11.2-24 R1's are 43" in diameter compared to the 40" on the 15-19.5. Don't think I could make that fit, unless you think there is another 2" of clearance.

 

[Cogsy75]

Cogsy75, I haven’t disconnected the backhoe yet, I need it for weight while snow plowing. Have you and did you have any issues?

No problem at all with the backhoe

 

[PJR832]

still waiting for my 72D & 220R MSL to arrive.

Thing only thing I would be worried about is the 220R MSL, the lift cylinders are almost fully retracted when the bucket sits flat on the floor.

 

[414concrete]