Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
The lights on my 2155 didn't work, when I reached under the dash to check the back of the switch it just fell apart from rusting. I purchased a new switch but now I can't figure out which wire to hook to which terminal. I tried to find a schematic on line, no luck. Would anyone have a schematic or maybe take a picture of the back of the switch and post or send to me. Email: [email protected].
 

·
Premium Member
Joined
·
8,651 Posts
I may be able to help. I have a JD 2030, so it's wiring may NOT be the same.
Does your headlight switch have 5 terminals?
Labeled: B, FL, HD, TL, and W
B = red wire from ignition switch
FL = dark blue wire to rear work light (flood light)
HD = pink wire to head lights
TL = yellow wire to red bulb inside rear work light (flood light)
W = Orange/white stripe wire to flashing warning lights

That's how my 2030 is wired. Hope it helps
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #3 ·
Thanks Zebrafive

I'm out of town for business until Thursday, but am excited to take a look and see if it matches up to my tractor. Thanks for the info!
 
1 - 3 of 3 Posts
Top