Green Tractor Talk banner

1 - 7 of 7 Posts

·
Administrator
Joined
·
17,046 Posts
Welcome,
What loader are you trying to fit to the 2210?
 

·
Super Moderator
Joined
·
7,864 Posts
The 210, 200X and 200CX loaders were available for the 2210. The mounting brackets are different for the 210 VS 200X / 200CX loaders.

200X / 210CX requires:
AW33249 Tie Bar
AW33106 Right Hand Side Brckt.
AW33107 Left Hand Side Brckt.
W51614 Bolt / M12 x 35 (14)
14M7299 Nut / M12 Flange Nut (4)​

210 Loader requires :
AW31264 Right Hand Brckt.
AW31263 Left Hand Brckt.
19M7790 Bolt / M12 x 35 (14)​
 

·
Registered
Joined
·
1,005 Posts
As far as 200cx loader brackets go, they are interchangeable between the 2210/2305/2320/2025s. Just use different holes on the brackets. There are 8 holes and you use 4. Also you dont use the "tie bar" on the 2320/2025s.

Hood guards are also interchangeable.

I just transferred my brackets/hood guard from my 2305 to 2320 a month ago.. Have the tie bar as the spare parts.. :laugh:
 

·
Super Moderator
Joined
·
7,864 Posts
As far as 200cx loader brackets go, they are interchangeable between the 2210/2305/2320/2025s. Just use different holes on the brackets. There are 8 holes and you use 4. Also you dont use the "tie bar" on the 2320/2025s.

Hood guards are also interchangeable.

I just transferred my brackets/hood guard from my 2305 to 2320 a month ago.. Have the tie bar as the spare parts.. :laugh:
And I have a set of new, old stock 200X / 200CX brackets to fit a 2305, 2320 or 2025R. I'll take your word that they'll fit the 2210.
 

·
Registered
Joined
·
1,005 Posts
And I have a set of new, old stock 200X / 200CX brackets to fit a 2305, 2320 or 2025R. I'll take your word that they'll fit the 2210.
I dont see where a 2210 would be different from a 2305..

Here are pictures of the mounts mounted on my 2320.

First is the rear part, top 2 and lower right are universal 2305/2320. Lower left bolt is for the 2320, and empty hole is were the bolt goes for 2305.

P1030423.JPG

Here is the front of the mount.. Top 2 and lower left is 2305/2320, and lower right for 2305 would be the hole Im pointing to..
There are 2 more holes at the bottom of the mounts where the tie bar bolts to..

P1030424.JPG
 

·
Super Moderator
Joined
·
7,864 Posts
I dont see where a 2210 would be different from a 2305..
That's my point. I wouldn't want to make an assumption. They may well have identical bolt patterns and frame spacing but there's nothing I've seen that would indicate they're the same.

From the JD parts site

200X / 200CX Mounting frames for 2305

AW33249 Tie Bar
AW33866 Right Hand Mount Frame
AW33867 Left Hand Mount Frame
W51614 12M x 35MM Bolt (14)
14M7299 M12 Flange Nut (4)​
 
1 - 7 of 7 Posts
Top