Green Tractor Talk banner

2210 No pwr to blades

3414 10
Have 165 hrs on my 2210 and it's been great. Got on the other day and battery was dead. Needed to cut, so I jumped it with the truck. Cut for about an hour and a half. Had to stop for about two minutes so I let it run. Got back on and pulled the PTO swich and no blades. Nothing. Moved the PTO selector to different settings and no rear PTO rotation either. Hydralic is 3/4 way up the glass and no leaks. Any ideas? Thanks.
1 - 1 of 1 Posts
Welcome to DT...

Need more info please:

When you wrote
Got back on and pulled the PTO swich and no blades. Nothing.
I assume the tractor was still running?

Is this the original battery? If so-then that is probably the problem...Deere batteries are well know for dieing fast like that. If the battery is dead enough-or a shorted cell than there won't be enough voltage to pull the PTO solenoid on to engage the blades.

Do you have a voltmeter?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top