Green Tractor Talk banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hope this is posted in the correct place.

I have a 2305 with 300 hours. Yesterday the 3pt hitch lever has no resistance and just drops. Looked and found advice on the 10** line that needs a nut tightened on the lever but there is no nut on the 2305. Any clue what causes this? I borrowed the tractor so I hope it's a simple fix. Thanks.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Premium Member
Joined
·
12,749 Posts
Below is the parts illustration for the 2305 rockshaft lever. It is held to the shaft with a roll pin. Can you tell if the roll pin is still intact? If so, does it look like the main shaft (#25) is rotating?

 

Attachments

  • Like
Reactions: PJR832

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Below is the parts illustration for the 2305 rockshaft lever. It is held to the shaft with a roll pin. Can you tell if the roll pin is still intact? If so, does it look like the main shaft (#25) is rotating?

The roll pin is still intact and the shaft rotates with the handle. It raises and lowers the hitch just has no resistance so the lever falls forward.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Administrator
Joined
·
18,307 Posts
Here is the parts breakdown to go along with the picture, I'm guessing the detent ball and spring (#'s 23/24) is somehow missing or out of place.


ROCKSHAFT CONTROL LEVER

CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
1CH11406Knob1
2LVA801984Control Lever1
314M7273Nut2M8
4LVU800586Adjuster1
5LVU800977Rod1
6LVA800899Guide1
724M7055Washer18.400 X 16 X 1.600 mm
811M7078Cotter Pin12 X 20 mm
9LVU800679Spring1
10LVU800976Pin1
CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
11CH11501Pin1
12T110006Spring Locking Pin1SUB FOR CH11524
13CH19780Bolt1
14LVU800879Plate1
15LVU800883Plug1
16MIU802134Packing1SUB FOR CH10556
1719M7139Cap Screw4M8 X 20
1812M7065Lock Washer18 mm
19LVU800880Cover1
20M802255Pin1
CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
21LVU800881Gasket1
22CH11561O-Ring1
23M810658Spring1
24400RBall1
25LVU800882Shaft1ORDER LVA802855
LVA802855Shaft1
 
  • Like
Reactions: jgayman

·
Premium Member
Joined
·
12,749 Posts
Good call Kenny. I forgot that the 2320 does not have position control so the rockshaft lever will likely just have a forward-middle-rear detent.


Here is the parts breakdown to go along with the picture, I'm guessing the detent ball and spring (#'s 23/24) is somehow missing or out of place.


ROCKSHAFT CONTROL LEVER

CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
1CH11406Knob1
2LVA801984Control Lever1
314M7273Nut2M8
4LVU800586Adjuster1
5LVU800977Rod1
6LVA800899Guide1
724M7055Washer18.400 X 16 X 1.600 mm
811M7078Cotter Pin12 X 20 mm
9LVU800679Spring1
10LVU800976Pin1
CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
11CH11501Pin1
12T110006Spring Locking Pin1SUB FOR CH11524
13CH19780Bolt1
14LVU800879Plate1
15LVU800883Plug1
16MIU802134Packing1SUB FOR CH10556
1719M7139Cap Screw4M8 X 20
1812M7065Lock Washer18 mm
19LVU800880Cover1
20M802255Pin1
CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
21LVU800881Gasket1
22CH11561O-Ring1
23M810658Spring1
24400RBall1
25LVU800882Shaft1ORDER LVA802855
LVA802855Shaft1
 
  • Like
Reactions: Kennyd
1 - 5 of 5 Posts
Top