Hi all - new here - recently bought a 2305 with a loader. Up until tonight all I had done is change the fluids and buy attachments. Finally got to work tonight digging a small area for interlocking pavers, but after about half an hour when all of a sudden the sound changed (went silent in transmission area), all you could hear was the engine running, and the drive shaft spinning. At this point you could drive forward and reverse, and let the bucket and 3pt hitch down, but otherwise no hydro lifting, and no power steering. Fluid appears to be high, if anything, but was bang on when I started, as I had just serviced it.
If I had to guess i'd say the pump was getting noisy and then failed, but I'm wondering if this is realistic, as I don't know S#$$ about hydrostatic.
I saw a couple of other threads on this, but nobody ever posted resolution that I could tell..
Any help is appreciated.
If I had to guess i'd say the pump was getting noisy and then failed, but I'm wondering if this is realistic, as I don't know S#$$ about hydrostatic.
I saw a couple of other threads on this, but nobody ever posted resolution that I could tell..
Any help is appreciated.
