Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter #1
I have a 2010 2305, about 150 easy hours. While under it serviceing it tonight I noticed the rear of the main driveshaft has a wiggle to it. This is not the rear u joint that I have neglected to grease. I was planning on doing that, and thats how I came upon the loose connection. It seems to be where the rear of the driveshaft connects to the spline coming out of the transmission. It isn't like it moves a half inch back n forth but there seems to be more movement there than I would like to see. I tried to get a video of it but it didn't come out very well.

I would hate to take it to the dealer for this if it is nothing.

Has anybody else experienced this?

Thanks for any input.
 

·
Registered
Joined
·
65 Posts
Same here! Been like that for as long as I can remember. Mine is a 2008 with 550hrs. so far so good.
 

·
Registered
Joined
·
2,780 Posts
My 1026 has a bit of play too. Doesn't seem to be the in the u joints. The splines seem to be where the play is on mine.

Sent from my SM-T900 using Tapatalk
 
1 - 3 of 3 Posts
Top