Randy,Well, I sure miss read his post, didn't I? :slap-yourself-emoti
So, what is the issue? Is he putting a deck on a machine that don't belong? I am still confused.:think: If this deck is an option for his machine wouldn't his dealer have the same answers provided by Greg and Chris?
Chris,that is all that is the same. Look at my previous post. Now this is what I've been reading,not my own observations.Since the deck bodies are the same, it can be done.
Greg, read my first post above where I stated the other differences that I found.Chris,that is all that is the same. Look at my previous post. Now this is what I've been reading,not my own observations.
My bad.:flag_of_truce:Greg, read my first post above where I stated the other differences that I found.
My point to Randy was that since both decks were starting from the same base, it could be made to work. It will just take more money & parts.
Answering for Greg here, but they are from www.jdparts.com and you can register there for free. There is a quick little tutorial linked in my signature if you need hepl with it. It's the same system the dealer uses at the parts counter. Hint: "Think like a parts guy" when using it.Greg where did you get parts picture. I need the parts #s to compare.
Yelbike,I'm pretty sure the belts have different part numbers.I come up with the same drive belt also.