Green Tractor Talk banner

2520 Snowblower Attaching Kit

13415 Views 27 Replies 12 Participants Last post by  jgayman
Finally got to the dealer today to pick up the Front Attaching Support Kit (LVB25302) for our 2520. I had kept the one from our 2320 (LVB24895) but that obviously would not work. Since the support kit for the 2320 was a 1 piece design, even I could determine where and how to mount it. My question on the two brackets for the 2520 is where they go in relationship to the frame of the tractor. I can obviously match up the bolt holes but it would appear as if these brackets would fit outside the frame but inside the grille guard, thus replacing the black plastic spacers in there now.

Is that correct?


Thanks,
lost

Attachments

1 - 3 of 3 Posts
:thumbup1gif:

You got it.
Is that correct?


Thanks,
lost
Welcome to DT Ron!

If what you are saying is true and the plates are EXACTLY the same as shown above. Then you should be good to go. Just swap out the plates and you shouldn't need to swap 'em back. You may need an additional adapter bracket that now connects to these plates for the MMM. As shown in the attached item number one.

Attachments

Excellent, that is Good news.

I finally figured it out! ! ! ! ! ! ! Had to buy a few parts but it looks like it's going to work.... Thanks all,,,,,,,Ron
But, you aren't going to get off that easy. We want details and all of them and pics. :nunu:
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top